Download Print this page

Habitat Nadia NADI-BE-SS18-A Assembly Instructions page 2

Rattan bed -135cm/150cm

Advertisement

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
General care and maintence
·
This product is designed for indoor use only!
·
Take care when moving furniture - dragging it across the floor will loosen and damage the joints.
·
Always lift and move
·
From time to time check that there are no loose fittings. Tighten as necessary.
·
Avoid exposing your furniture to direct and prolonged periods of sunlight and heat sources as fading and
cracking may occur.
·
Take care to prevent sharp objects e.g. toys, buckles and heels from coming into contact with your furniture,
and avoid contact with chemicals e.g. cosmetics or hair products which may permanently mark the surface.
Cleaning and care
·
Gently vacuum rattan weave to remove dust build-up
·
Wipe up any spills immediately with a damp cloth and then dry the surface with a clean dry duster.
·
Repeat this procedure for periodic cleaning.
·
Remove stubborn stains with a weak washing up liquid solution and a damp cloth and dry after with a clean cloth.
·
The use of furniture polish or spray is not necessary or recommended.
·
Never use abrasive or corrosive cleaning agents.
Extra Felt Feet Pads
For Uneven Floors
This product has been
supplied with additional felt
feet pads that can be used
to help level up furniture on
uneven floors.
General information
If for any reason you should have
problems with your Habitat product,
please contact the store from which
you purchased it.
Please retain your receipt as proof of
purchase.
If you have any comments or
suggestions regarding this product,
assembly instructions or service
MAX
300kg
Maximum recommended loading.
Do not stand on bed!
received, please contact the store or
Habitat Head Office via its web site:
www.habitat.co.uk
or write directly to: Habitat Retail Ltd.
489-499 Avebury Boulevard,
Milton Keynes MK9 2NW

Advertisement

loading