Viavi T-BERD MTS-2000 Quick Card page 2

Modular test set, setting up as a wireless access point for remote access with smart access anywhere

Hide thumbs Also See for T-BERD MTS-2000:

If the screen displays "Wireless is disabled", press the Wireless soft key to enable

Wi-Fi.

Set Wlan Mode to AP Master. Once this mode is selected, the SSID and the IP

Address and IP Subnet Mask of the test set are displayed. The assigned SSID is

2000_XXXXX where XXXXX is the serial number of the test set.

Press the Create Network soft key to enable the AP Master and advertise the SSID via

Wi-Fi. The soft key will be grayed out.

Tap the Exit soft key to return to the Connectivity screen. The IP Address and SSID

(called Hosting Access Point on this page) are displayed in this screen.

Connect to the test set's Wireless SSID, 2000_XXXXX, from your Laptop, iPhone, iPAD,

or Android device.

10.

Use the Smart Access Anywhere app to access the test set.

(+1 844 468 4284)

Figure 2: Wireless Connectivity settings

Figure 3: Connectivity screen

To reach the VIAVI office nearest you,

visit viavisolutions.com/contacts.

VIAVI Solutions

Product specifications and descriptions in this

document are subject to change without notice.