Drying level damp
Drying level normal
Drying level extra
5.7 Warning symbols
C
NOTE
• Warning symbols may vary depending on
the model of your machine.
Fibre filter cleaning
When the program is completed, the warning
symbol for filter cleaning turns on.
C
NOTE
• For detailed information, See 6
Maintenance and cleaning.
• If filter cleaning symbol constantly flashes
See.7 Troubleshooting.
Emptying the water tank
When the program is completed, the warning
symbol to empty the water tank turns on.
16
C
NOTE
• For detailed information, See 6
Maintenance and cleaning.
If the water tank fills up while the program
continues, the warning symbol starts flashing
and the machine goes into stand-by. In this
case, empty the water tank and start the
program by pressing the Start / Stand-by
button. Warning symbol turns off and program
resumes.
Loading cover is open
If loading cover of the dryer is open while
drying, Stand-by symbol turns on and program
progress symbol flashes.
End time
You can delay the end time of the program up
to 24 hours with end time function.
•
Open the loading door and place the
laundry.
•
Select drying program, spin cycle and if
needed, additional functions.
•
Press the End Time selection button and
set the delay time you wish. End Time
symbol turns on. (When pressed and hold
the button, End Time proceeds non-stop).
•
Press the Start / Stand-by button. End
time countdown starts and Start symbol
turns on. ":" Separator in the middle of
displayed delay time flashes.
Dryer / User Manual