quanergy QPU-L7 Quick Start Manual

QPU-L7 with
Server Quick Start Card
Thank you for purchasing the Quanergy Processing Unit-L7 (QPU-L7™) host computer for Q
(formerly Q-Guard™) server software. This card summarizes how to use this system with Quanergy LiDAR
M-Series sensors, including all models of M8™ and MQ™-8.
Overview
The QPU-L7 is a Linux®-based computer with Q
operation, data collection, and surveillance. The QPU-L7 can accept inputs from up to six sensors. The
QPU-L7's Ethernet network capacity is sufficient to support the raw data stream from sensors.
Q DTC is a LiDAR-based 3D perception and volumetric sensing solution that detects, tracks, and
ORTEX
classifies (DTC) of person and vehicle objects for applications in security and smart cities and spaces.
The Q DTC server receives input from the LiDAR sensors and publishes output to the user's
ORTEX
network infrastructure. That output is consumed by a Q
The Quanergy-installed server on the QPU-L7 is ready to run as soon as you turn it on and activate a
license. (On the same network, the client is user-installed on a separate Windows machine as explained
in the Q DTC User Guide, and M-Series sensors are installed as explained in each sensor's User Guide. Refer
ORTEX
to listed Documents below.)
Specifications
Hardware Central Processing Unit
Random Access Memory
Storage Memory
Display Port
Serial Port
USB Port
Ethernet Network Port
Software Operating System
Documents
Access user documents as follows:
• Cincoze DS-1100 Series User's Manual — http://www.cincoze.com/data/files/201708/Manual_DS-1100_R1.3_20161107004.pdf
• User Guide and Quick Start Card — request from support@quanergy.com, specifying the sensor model
• Q DTC User Guide and Q
ORTEX
• QPU-L7 with Q DTC Server Quick Start Card — http://downloads.quanergy.com
ORTEX
• Q-View™ User Guide and Q-View Quick Start Card — http://downloads.quanergy.com
ORTEX
Intel® i7-6700TE 2.4 GHz 4-core processor
8 GB RAM DDR4-2133
Primary drive: 64 GB for OS and applications
Secondary drive external bay
Video, standard Intel chip set capability
RS232 or RS422 (2x)
USB 3.0 (2x) for high speed devices such as extra memory
USB 2.0 (2x) for user input devices
LAN 10/100/1000 RJ45 (x2)
Linux 16.04 LTS
DTC Quick Start Card — http://downloads.quanergy.com
ORTEX
DTC
DTC server software pre-installed for sensor
DTC client and/or third-party application.
ORTEX
DTC™
ORTEX