Checking/Changing Steering Oil - MASSEY FERGUSON MF 240 Care Instructions

Hide thumbs Also See for MF 240:
Table of Contents

Advertisement

Checking/Changing Steering Oil

Checking and Changing the Steering Oil and Filter :
MF-350/260
Mechanical steering has been installed in this tractor, in which to check oil in the steering
box, remove the plug located on the steering box. Make sure the oil is completely filled with
oil. Replenish if the oil level is low and tighten the plug back on.
MF-385/375/385 4WD
Power steering has been installed in this tractor. To check the oil in this unit, remove the oil
reservoir plug located next to the steering pump at front of the engine. If the oil trickles
slowly out of the hole, place the plug back in and tighten. Replenish if the oil level is low.
Chapter 20
Place to check / refill oil in the
steering assembly
40
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mf 350 plusMf 260Mf 360Mf 375Mf 385Mf 385 4wd

Table of Contents