How To Change The Diesel Filter - MASSEY FERGUSON MF 240 Care Instructions

Hide thumbs Also See for MF 240:
Table of Contents

Advertisement

How to Change the Diesel Filter

How to Change the Diesel Filter in Tractor ?
Diesel filters are placed on the left side of the tractors. The glass cup filter is called the
'primary filter' and the other one is called the 'secondary filter'. Check the primary filter
daily, if you find water or dust in the diesel then manually open the drain tap under the
glass cup to drain the dirty diesel. Stop cock of the diesel tap must be open during while
draining the diesel. Daily cleaning of the diesel this way protects important and expensive
parts like fuel injection pump and atomizers.
Before installing the diesel filter, first and foremost it is important to close the diesel tank's
stop-cock.
Remove the small bolt on top of the filter body with the key provided, and separate the
filter. Replace the small rubber ring with a new ring. Similarly after replacing the two bigger
rings place the new diesel filter and tighten the bolt.
Open the diesel tank's stop cock, manual restore the diesel supply in the fuel line by
pumping the priming lever of the fuel lift pump.
Very Important
Change the diesel filters regularly on timely basis and use only genuine filters. Never use
polluted oil.
1) Center bolt
Chapter 13
2) Filter head
3) Filter
7
28
4) Glass cup
5) Drain tap

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mf 350 plusMf 260Mf 360Mf 375Mf 385Mf 385 4wd

Table of Contents