Advertisement
Overview
Installing and Connecting the RJ-45 Connector
The IKAN-116-IP65/iKAN-124-IP65 is equipped with an RJ-45 waterproof
connector that is optional for use with E1 and E2 port. It can effectively
protect the connection points from weather and climate.
1. Remove the RJ-45 connector from the RJ-45 cable
2. Feed the end of the RJ-45 cable through the Sealing Nut, Seal, Screw Nut,
Clamping Ring and Gasket
Sealing Nut
Reset Button
Screw
Seal
Nut
Ethernet Port (E1)
Ethernet Port (E2)
I/O Connector
Power Connector
Clamping
Gasket
Ring
P2
Advertisement
