Technical Information - Electrolux EUF2743AOW User Manual

1. To change the opening direction of the
door open the door and empty the
shelves.
2. Unscrew the upper hinge.
3. Remove the door from the lower
hinge.
4. Remove the cap (A) with the help of a
tool.
5. Unscrew the lower hinge (C) and the
washers (B).
6. Position the pin and the washers on
the opposite side.
7. Re-insert the cover (A) on the opposite
side.
8. Refit the door.
9. Screw the upper hinge.

10. TECHNICAL INFORMATION

10.1 Technical data
Height
Width
Depth
A
B
C
10. Unscrew the handles (B) and fix them
on the opposite side (C).
C
11. Re-insert the handle cover pins (A) on
the opposite side.
CAUTION!
Reposition, level the
appliance, wait for at least
four hours and then connect
it to the power socket.
Do a final check to make sure
that:
• All screws are tightened.
• The magnetic seal
adheres to the cabinet.
• The door opens and
closes correctly.
If the ambient temperature is
cold (i.e. in Winter), the
gasket may not fit perfectly to
the cabinet. In that case, wait
for the natural fitting of the
gasket. In case you do not
want to carry out the above
mentioned operations,
contact the nearest After
Sales Service Force. The
After Sales Service specialist
will carry out the reversibility
of the doors at your cost.
mm
mm
mm
ENGLISH
B
1854
595
668
33
A