Preliminary Operations; Some Recommendations; Emptying The Tub - Jacuzzi muse Use & Maintenance

Preliminary
operations
We recommend filling the tub with
already mixed water (hence, not boil-
ing water first followed by cold water)
recommendations
The backrest jets are not adjustable.
Do not close the nozzles fully! Be-
fore starting the hydromassage,
ensure that the nozzles are not
closed!
The higher the temperature, the less
time that must be spent in the hydro-
massage tub:
34-36 °C / 20 minutes
36-38 °C / 15 minutes
38-40 °C / 10 minutes
draining the tub
When the message "Sc" disappears, it
is possible to turn off the main switch
F
irst of all, it is necessary to fill the tub; where Jacuzzi® brassware is used, ensure that
the lever on the back of the spout is positioned upwards (in reverse, the water will come
out of the shower).
some
Once immersed in the tub, the water level must fully cover the nozzles on the backrest.
Ensure that the hydromassage nozzles are facing toward the body parts to be mas-
saged.
It is also possible to vary, according to limits, the intensity of these jets, by rotating the
respective nozzle as indicated. In any case, substantial adjustments must be made using
the relative function (accessible from the J.touch remote control).
Technically, the hydromassage duration varies in the range of 15 to 20 minutes; the
initial effects can be felt after just 5-10 minutes: you will feel revitalised, less stressed, the
muscles will be more toned, you will experience a general sense of well-being.
The hydromassage duration depends greatly on the water temperature: in order to
allow the body to get used to the hydromassage, begin with a session which does not
exceed 10 minutes, up until you reach a duration which is suited to your individual re-
quirements.
Soap and bath foams must only be used when the hydromassage is not in use, just like
a standard bathtub.
The tub must ALWAYS be emptied with the hydromassage off
To completely drain the tub, it must be emptied without turning off the main switch:
when the last of the water is released from the drain, a valve which fully drains the circuit
is activated (the message "Sc" appears on the display).
33