Operating Instructions - ECTIVE BlackBox 3 Operating Instructions Manual

22 ECTIVE BlackBox
Charging while the BlackBox is switched on
If the BlackBox is charged while it is on, "Charging" will light up on
the display When the BlackBox is fully charged, the display indicates
"100%" and "Charging"
Charging while the BlackBox is switched off
When the BlackBox is charged while it is switched off, the display shows
the current charge level When the BlackBox is fully charged, the display
shows "100%"

Operating Instructions

Switching on the BlackBox
Use the on/off switch to turn on the BlackBox This will start the internal
processor and LCD display It also records the time of power-on
Alternating current 230V
When you press the AC button, the display shows "230V ON" After three
seconds a signal tone sounds The output voltage is now 230V and, de-
pending on the model, has a capacity of 300, 500, 1000 or 1500W
The current consumption is shown on the display after a device has been
connected
Press the AC button again to deactivate the power supply to the 230V
sockets The display will now show "230V OFF"