Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Coemar Otello T/D
Summary of Contents for Coemar Otello T/D
- Page 1 Otello T / D...
- Page 2 Otello T / D Serial Number: ........................................Purchase date: ........................................Dealer: ........................................Address: ........................................Suburb: ........................................Country: ........................................Phone / Fax: ........................................Please note in the space provided above the relative service information of the model and the retailer from whom you purchased your Otello T / D: this information will assist us in providing spare parts, repairs or in answering any technical enquiries with the utmost speed and accuracy.
-
Page 3: Table Of Contents
Index 1. Packaging and transportation..........................Pag. 4 1.1. Packaging................................Pag. 4 1.2. Transportation..............................Pag. 4 2. General information..............................Pag. 4 2.1 Safety informations............................Pag. 4 2.2 Warranty conditions............................Pag. 5 2.3 EC Norms .................................Pag. 5 3. Product specifications ............................Pag. 6 3.1 Technical characteristics - Otello 6.........................Pag. 6 3.2 Technical characteristics - Otello 8........................Pag. -
Page 4: Packaging And Transportation
Congratulations on having purchased a Coemar product. You have assured yourself of a fixture of the highest quality, both in componentry and in the technology used. We renew our invitation to you to complete the service information on the previous page, to expedite any request for service information or spares (in case of problems encountered either during, or subsequent to, installation). -
Page 5: Warranty Conditions
3. The level of technology of Otello T / D requires the use of specialised personnel for all ser- vice applications; refer all work to your authorised Coemar service centre. 4. A good earth connection is essential for the proper functioning of the projector. Never con- nect the fixture if there is no earth connection. -
Page 6: Product Specifications
Product specifications Technical characteristics - Otello 6 Power supply 85-264 V, auto-sensing, 50/60 Hz Maximum current 0.96 A @ 230 V - 1.92 A @ 115 V Power factor Cosφ = > 0.95 Max power consumption 210 W Color temperature Tungsten: 3.200 K - Daylight: 5.600 K Color Rendering Index (CRI) Avg. -
Page 7: Projector Dimensions
Projector dimensions Otello 6 *manual version Otello 8 *manual version... -
Page 8: Unit's Main Components
Unit’s main components Components description Adjustable yoke Yoke locking handle Fresnel lens Color frame holder... -
Page 9: Back Panel Description
Back panel description Display Plus button Menu button Minus button Enter button PowerCon In DMX Out PowerCon Out DMX In... -
Page 10: Installation
. Installation Mechanical installation Otello T / D may be hung from an appropriate structure in any position or on tripod. If hanging the fixture from a lighting truss or similar, we recommend the use of an appropriate clamp “A”, as shown in the following diagram. Warning!! Always ensure that your support structure and fixing (bolts, clamps, etc…) are rated... -
Page 11: Powering Up
Note: in case of cable replacement, similar cable with comparable thermal resistant qualities must be used ex- clusively (cable 3 X 1,5 ø external 10 mm, rated 300/500 V, tested to 2 KV, operating temperature -40°C + 180°C, Coemar cod. CV5311). Connection to mains power Otello T / D is equipped with two power connectors, one as input and one as output, which can be used to feed up to 8 (at 230 V) or 4 (at 115 V) fixtures. -
Page 12: Control Signal Connections
Warning! • The use of a thermal/magnetic circuit breaker is recommended. Strict adherence to regulatory norms is strongly recommended. • Otello T / D should not be powered through a dimmer as this may damage the internal switching power supply. •... -
Page 13: Turning The Projector On
. Turning the projector on After having followed the preceding steps described, proceed with the power supply and turn on the projector connecting it to the mains power. The software version installed on the internal microprocessors will be shown on the display, suddenly it will show the current DMX addressing. -
Page 14: Dmx Chart
. DMX chart DMX chart 5 / 1 channels channel function type of control effect decimal percentage master dimmer proportional adjust luminous output intensity from 0 to 100% 0 - 255 - 100% spare channel step no effect 0 - 255 - 100% dimmer fine proportional... -
Page 15: Display Panel Functions
By suitably using all the functions of Otello T / D, which can be activated through its display panel, it is possible to change some of the parameters and to add some functions. Changing the preset settings made by Coemar can vary the functions of the projector so that it will respond differently to the controller;... -
Page 16: Quick Dimmer Menu
10.3 Quick dimmer menu By pressing the enter button, the user will enter the quick dimmer menu: thanks to this menu it will be possible to increase and decrease the light intensity in steps of 10 (in a range from 0 to 100). -
Page 17: Main Functions Menu
10.4 Main functions menu Tungsten: Mimics the slow dimming curve of tungsten tUnG lamps. Dimmer: [Tungsten] It allows the selection of different dimmer curves: exponential (default), logarithmic and linear; Test: Allows to manually set the DMX channels con- trolled by a DMX console: dIMM •... - Page 18 DMX channels: Shows the DMX mode and number of channels 5 CH selectable; Channels] [DMX channels] Display functions: Changes the display settings: • Reverse: rotates the display of 180°; 1 CH Channel] • Auto: Sets or disables the automatic display turn off function, which would occur after 10 seconds of inactivity;...
-
Page 19: Measures Menu (Meas)
10.5 Measures menu (MEAS) Temperature: tEMP Shows the current temperature values: t.LEd • LED: shows the LED module temperature; [LED Temperature] • Board: shows the electronic board temper- [Temperature] ature. Volt: Shows the power supply voltage. [Board Temperature] DMX Input: vOLt Shows the value of the DMX channels received by the fixture on every channel that the fixture... - Page 20 LED: Shows the percentage value of the LED status. Fre: Shows the operating frequency of the LED (611 Hz as default). [LED Status] Fan speed: Shows the voltage in which the fan is operating Usage hours: Shows the hour counter of the fixture: •...
-
Page 21: Special Functions Of The Fixture
The projector self-diagnostic routine didn’t find any issue. [No Alarm] Data error DTER Initial data loading has failed the projector loaded the default data settings: restart the fixture again, and if the error persists contact the Coemar [Data Error] assistance center. Address error ADER The projector does not receive all channels of DMX needs to function properly. -
Page 22: Maintenance
. Maintenance 11.1 Firmware update The firmware of Otello T / D can be updated through the RDM protocol (ANSI E1.20). Contact Coemar as- sistance to receive the software and the device updater. 11.2 Periodic cleaning Lenses Even a thin layer of dust can reduce the luminous output and alter the consistency of the beam. Regularly clean all filters and lenses using a soft cotton cloth, dampened with a special lens cleaning solution. -
Page 23: And Answers
. F.A.Q. and answers The following list shows common issues that may be simply solved. If issues persist, the unit must be repaired by a qualified personnel or just contact your Coemar service near you. Question Possible solution Projector not powered on: •... - Page 24 User notes ................................................................................................................................................................................................................................................................................
- Page 25 Information on disposal of the equipment The equipment at the end of its useful life must be disposed of at an appropriate recycling center for waste electrical and electronic equipment. The treatment and disposal of environmentally friendly, helps prevent potential negative environmental and health and promote the reuse and / or recycling of materials making up the equipment.
- Page 26 Coemar Lighting s.r.l. Via Carpenedolo 90 46043 Castiglione delle Stiviere, Mantova, Italy phone. +39 0376/1514412 - fax +39 0376/1514380 info@coemar.com Coemar reserves the right to change specifications without prior notice...
Need help?
Do you have a question about the Otello T/D and is the answer not in the manual?
Questions and answers