RADAC WaveGuide 5 User Manual page 5

Preface
This user manual and technical documentation is intended for engineers and technicians
involved in the software and hardware setup of the WaveGuide 5 Onboard system, Explosion
Proof version (WG5-OB-EX).
Note
All connections to the instrument must be made using shielded cables. The shielding must
be grounded at both ends of the cable. Please refer to Chapter 2 for more details regarding
wiring and cable specifications.
Legal aspects
The mechanical and electrical installation must be carried out by trained personnel with
knowledge of the local requirements and regulations for installation of explosion-proof equip-
ment in hazardous areas.
The information in this user manual is the copyright property of Radac BV.
Radac BV disclaims any responsibility for personal injury or damage to equipment or
property caused by:
• Deviation from any of the prescribed procedures.
• Execution of activities that are not prescribed.
• Neglect of the general safety precautions for handling tools and use of electricity.
The contents, descriptions and specifications in this user manual are subject to change
without notice. Radac BV accepts no responsibility for any errors that may appear in this
user manual.
Additional information
Please do not hesitate to contact Radac or its representative if you require additional
information.