Advertisement
Before installation, please make sure all devices you wish to connect have
been turned off.
1) Connect the audio source device to the Converter using appropriate R/L
cable.
2) Connect the A/V Receivers or Amplifiers to the Converter using appropriate
Toslink or Coaxial cables.
3) Insert the DC side of 5v power supply into the converter and then connect
the AC side of the power supply into the wall outlet.
Attention: Insert / Extract cable gently.
WARNING
1. Do not expose this apparatus to rain, moisture, dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed on the
apparatus.
2. Do not install near any heat sources such as radiators, heat registers,
Stoves or other apparatus(including amplifiers)that product heat.
3. Do not place sources of naked flames, such as lighted candles, on the unit.
4. Clean this apparatus only with dry cloth.
5. Only use attachments/accessories specified by the manufacturer.
6. Refer all servicing to qualified service personnel.
Analog to Digital Audio Converter
Advertisement
