H-Tronic HT8S plus Manual page 16

8-channel transmitter
Table of Contents

Advertisement

Available languages

Available languages

notIce!
– This transmitter only works together with the H-TRONIC receivers
8-channel ht200e (Art.-No. 1618250), 3-channel ht3e (Art.-No.
1618255), 1-channel ht1e (Art.-No. 1618260) and our 1-channel
receiver with socket-outlet ht1ePP (Art.-No. 1618265). Other
receivers cannot be used. The transmitters must be trained to function
with the receiver.
– The radio system operates on the european frequencies 868,53MHz,
869,05MHz or 869,55MHz.
– This transmitter may only be operated in areas where you can see
the device to be controlled. Never switch devices where you have no
visual contact.
– When installing in radio-controlled toys / models, the relevant BZT
regulations must be followed.
saFetY InFormatIon accordIng to r&tte: danger!
Radio remote controls are only permitted for devices and systems in which a radio
interference in the transmitter or receiver does not endanger persons, animals or
property, other than if this risk is covered by other safety devices. The user must
be informed that a radio remote control of installations with an accident-risk, may
only be carried out if there is a direct visual contact with the system and that the
area is free of persons, animals and objects. Hand transmitters are to be kept in
such a way that unintentional activation, e.g. by children or persons with reduced
physical, sensory or mental abilities or lack of experience and knowledge or
animals is not possible.
warnIng: This remote control is only applicable for devices and systems in
which radio interference in the transmitter or receiver does not pose a risk to peo-
ple or installation. In addition, a higher-level emergency stop system that can be
triggered manually should be integrated in the component that is to be controlled.
The remote control of devices and systems with an increased risk is prohibited.
Crane systems of any kind may not be operated with this radio remote control.
This remote control may only be operated in an area in which the area of the
system to be operated is visible. No liability whatsoever is taken for any damage
caused by external influences, such as malfunctions or negligent operation by the
user.
16 | Designated use

Advertisement

Table of Contents
loading

This manual is also suitable for:

16 18 190

Table of Contents