Radio Operation; Antenna; Switching The Radio On And Off; Selecting And Programming Radio Stations - Telefunken RC1002BM Instruction Manual

5.

RADIO OPERATION

5.1

Antenna

EN
„
The appliance is equipped with a telescopic FM antenna (9) located on the top of the
appliance.
„
Pull out the antenna completely and rotate to achieve the best reception.
5.2

Switching the radio on and off

„
Press
„
Press repeatedly FUNCTION (6 or 28) to select FM radio operation mode.
IYPLÅ` ZOV^U VU [OL KPZWSH`  0U -4 YHKPV VWLYH[PVU TVKL [OL KPZWSH`  ZOV^Z [OL
currently set radio frequency.
„
To switch off the radio, press repeatedly FUNCTION (6 or 28) to set the appliance to a
different audio mode (CD, USB, BT (Bluetooth) or AUX) or press
off the appliance.
5.3

Selecting and programming radio stations

„
Rotate the Tuning control knob (20) or press TUN- and TUN+ (40, 42) keys on the
remote control to select the desired radio station.
„
Press TUN- or TUN+ (40, 42) once to move in increments of 0.5 MHz. Press and hold to
automatically switch to the next available radio station.
„
The FM stereo indicator STEREO lights up when a strong stereo signal is found. This
provides the best sound for radio stations with a strong signal. Use FM ST/MO (31) key
on the remote control to switch between stereo and mono radio signal - mono signal is
recommended for radio stations with weaker signal.
„
To save the radio station that the radio is tuned to, press MEM P-MODE (3 or 30).
blinks.
„
Use MEM/DIR/10- (4) or MEM/DIR/10+ (8 or 39) to select the desired position on the
preset station list. Up to 30 stations can be saved to the memory (
„
Press MEM P-MODE  VY  [V JVUÄYT
„
To select one of the preset stations, repeatedly press MEM/DIR/10- (4) or
MEM/DIR/10+ (8 or 39).
5.4

Scanning radio stations

„
To scan all the available radio stations at your location press SCAN (17). The appliance
will automatically scan all the available radio stations and save them into the memory.
„
To select one of the preset stations, repeatedly press MEM/DIR/10- (4) or
MEM/DIR/10+ (8 oder 39).
(IM_for_approval)953-000067_RC1002BM_GB_V03_080115_2010955.indd 28
(21 or 27) to switch on the appliance.
or the next available program number appears on the display (23). The number
28
will be
(21 or 27) to switch
to ).
1/9/15 8:35 PM