Radio Operation - Telefunken TF-CSRP3448 Instruction Manual

Instruction manual
CD/MP3 operation
• Press MODE to select the CD mode.
• Open the CD compartment at the top.
Insert the CD/MP3 disc, close the CD door,
wait a few seconds, the player will play the first
track and the LCD will display the format, "CD"
or "Mp3" etc.
• Press PLAY/PAUSE button to pause
playback. Press the button again to resume
playback.
• Press repeatedly
to go to next or previous track. Press and
hold / buttons for backward or forward
searching; release the button for normal
playback.
• During the playback, press REP.
The unit will repeat the current track.
Press again to repeat all tracks. Press for
the third time to cancel.
• To stop the playback press and hold
the STOP/REP/MEM button.

Radio operation

• Press MODE to select the RADIO mode.
It is selected by default when you switch on
the unit.
• Use the TUN+/- buttons to search for
available radio stations. The frequency will
continue to change and will automatically
stop when a broadcast station is received.
• Press and hold the TUN+/- to manually
adjust the frequency.
• Press the MEM button to save the
selected radio station. The unit can store up to
20 stations.
Antenna
• For improved reception, adjust the
telescopic antenna appropriately to obtain
the best reception of the radio signal.
USB operation
Playback
• Turn on the device
• Insert a USB device into the USB port
SD. Press MODE to select the USB mode.
5
button or button
• Playback of the first track will start
automatically. The display will show PLAY icon
in the top and the number of the track.
4
• Press PLAY/PAUSE button to pause
playback. Press the button again to resume
playback.
• Press repeatedly
to go to next or previous track. Press and
hold / buttons for backward or forward
searching; release the button for normal
playback.
General USB notes
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.
• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (2.0 version) up to 32
GB.
• FAT and FAT32 file system are supported
by this unit.
AUX jack
You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speakers of this unit.
• To connect an external audio device,
please use a standard audio cable with 3.5-mm-
to-3.5 mm plugs (not included) to connect the
headphone out or audio line-out of the external
device to the AUX input socket.
• Select the AUX mode using the MODE
button.
• Turn on the external device. You cannot
control playback with the buttons of this unit except
adjusting the volume.
button or button