Advertisement
Troubleshooting
If you need to reset your bulb, simply turn the bulb on/off
3-5 times.
NOTE: Once the smart bulb is fully set up, turning the light
switch off and on multiple times in a row may cause the
bulb to go back into reset mode. If this happens, please
delete the bulb from your app and re-add it normally.
Pairing Modes:
EZ mode: The device's light is rapidly blinking for easy,
quick pairing setup.
AP Mode: Access Point mode is a secondary setup process
in which the bulb is slowly blinking and requires multiple
steps for pairing. Follow the on-screen step by step
instructions.
Advertisement
