Page 2
Energizer and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by Builder SAS. All other brand names are trademarks of their respective owners. Neither Builder SAS nor Energizer Brands, LLC is affiliated with the respective owners of their trademarks.
Page 3
Thanks for choosing the EZLSPB10 Series! You're excited to power up, so we'll keep this brief. Let's get started!
CAUTION: Read instructions and warnings before operating! SAVE THESE INSTRUCTIONS! READ ALL INSTRUCTIONS! SAFETY INSTRUCTIONS WARNING: To avoid serious injury or death from electrical shock or fire: DO NOT handle this fixture or try to plug it in when your hands are wet or damp or when standing on a wet or damp surface or in water.
SPECIFICATIONS 1. Handle 2. Fix screw 3. U-shape bracket 4. Stand bracket 5. Power switch 6. Power socket 7. LED indicator 8. Stand bracket fix screw 9. AC/DC adaptor 9. AC/DC adaptor (VDE) 9. AC/DC adaptor (UK) • Power: Max. 10W •...
Page 6
3.7 V D.C. Max. 10 W, Class III, IP44 LED chip is non-replaceable and cannot be changed, it is powered by a lithium battery inside. Battery manufacturer: Changhong Sunpower Co.,Ltd EZLSPB10 /EZLSPB10UK 3.7V D.C. 2200mAh Battery manufacturer: Changhong Sunpower Co.,Ltd...
OPERATION Press the switch ‘I’, the work light will be ON. Press the switch ‘O’, the work light will be OFF. To recharge, plug the charging cable as shown below. Note: Recharge only with the charger specified by the manufacturer. Loosen the knobs on sides to adjust the angle of the light head to aim light where needed.
Loosen the knobs on the base to adjust the rotation of the light head to direct light where needed. Retighten the knob to secure position. LAMP REPLACEMENT The LED chip in this fixture is not replaceable. It will last up to 50,000 hours and is not subject to breakage due to shock like typical halogen or incandescent lamps.