6. Level : Parameter Settings For The Oem - geminox QAA 73.110 Technical Instructions

4.3 - 6. Level : Parameter settings for the OEM

access the full settings list of the control unit LMU
via the sensor QAA73 and first level settings.
Buttons
Press on the both line selection buttons
beginning with the button
- This will take you to the first programming mode "LMU" (4. level)
Successive
display:
P R O G
1
et
Press both line selection buttons for at least 3 seconds.
- This will take you to the second programming mode "LMU" (5. level)
Successive
display:
2
P R O G
Press both line selection buttons for at least 9 seconds.
- A special display will appear (entering the OEM code : for the manufacturer)
Display :
3
P R O G
Explanation
.
b)
- 10 -
OPERATING LEVELS
and setting buttons
Line
c)