Operating Levels; Level : Parameter Settings For The End-User - geminox QAA 73.110 Technical Instructions

1 - 1. LEVEL : PARAMETER SETTINGS FOR THE END-USER

The setting of the room sensor can be made to meet
the individual needs of the end-user.
Buttons
Press one of the 2 line selection buttons.
- This will take you to the programming mode "End-user". (1. level)
Display :
1
P R O G
Press the line selection buttons to select the required line.(rep. b).
- The parameter list containing all possible settings is indicated in § 1.1 - section
2
P R O G
Press the plus or minus button to enter the required value (rep. c). The setting will
be stored as soon as you leave the programming mode or change to another line.
3
- The parameter list containing all possible settings is indicated in
By pressing the Info button, you leave the programming mode "End-user".
4
II - OPERATING LEVELS
a)
b)
a) Line name
b) Line number
c)
IV - Parameter list
§ 1.1 - section IV - Parameter list
Explanation
Setting of the parameter
- 5 -
Line
c)
. . .
permanent
display