Technical Specifications; Safety Specifications - Mangrove Jack's DUAL TEMPERATURE CONTROLLER Instructions Manual

Technical Specifications

• TEMPERATURE MEASURING RANGE: -50-99°C (-58-210°F)
• ACCURACY: +/- 1°C (-50-70°C OR -58-158°F)
• POWER SUPPLY: 220V AC +/- 10%, 50/60Hz
• SENSOR: NTC Sensor
• RELAY CONTACT CAPACITY: Cooling (10A/250V AC), Heat (10A/250V AC)
• AMBIENT TEMPERATURE: 0 – 50°C (32-122°F)

Safety Specifications

• Make sure the Dual Temperature Controller is used on a flat dry surface.
• Do not plug any device into the sockets on the back that exceed the
power ratings.
• Avoid getting water and dust into the air vents on the side of the Dual
Temperature Controller.
• Always use the controller with the specified power ratings.
• Do not operate if the cord, plug or appliance is damaged.
• Do not let cord hang over the edge of a table or touch hot surface.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
MANGROVE JACK'S DUAL TEMPERATURE CONTROLLER