Related Manuals for mercor mcr Pasat
Summary of Contents for mercor mcr Pasat
- Page 1 Grzegorza z Sanoka 2 80-408 Gdańsk tel. +48 58 341 42 45 tel./fax +48 58 341 39 85 TECHNICAL MANUAL Roof smoke exhaust fan mcr Pasat Version: Pasat 19.06.27.3 FIRE VENTILATION SYSTEMS...
-
Page 2: Table Of Contents
CONTENTS: 1. FOREWORD ............................3 2. MANUFACTURER'S DISCLAIMER ..................... 3 3. SUBJECT ............................. 4 4. INTENDED USE ..........................4 4.1. Application ........................... 4 4.2. Fire resistance ..........................5 4.3. Versions............................5 5. DESIGN AND OPERATING PRINCIPLE ....................5 5.1. Design ............................5 5.2. -
Page 3: Foreword
This Technical Manual does not apply to any fans manufactured prior to this Manual's date of issue. 1. FOREWORD__________________________________________________ This Technical Manual is addressed to users/operators of type mcr Pasat roof smoke exhaust fans. This document is intended to provide guidelines on the application, design, commissioning and operation of the product. -
Page 4: Subject
4. INTENDED USE___________________________________________________ 4.1. Application_________________________________________________________________ The type mcr Pasat roof smoke exhaust fans are intended to remove smoke and heat generated in indoor rooms on fire. The equipment facilitates evacuation of persons from the area on fire, protect the building structure and its furnishing from high temperature, facilitate fire fighting, and inhibit spreading of fire to adjacent fire zones. -
Page 5: Fire Resistance
4.2. Fire resistance__________________________________________________________ Class F400 – fire resistance at 400 C for 120 minutes □ Class F300 – fire resistance at 300 C for 60 minutes □ Class F200 – fire resistance at 200 C for 120 minutes □... -
Page 6: Function
The mcr Pasat roof smoke exhaust fan comprises an electrical motor with the insulation class F, a radial rotor and an external housing assembly. The insulated housing encloses the electric motor, on the shaft neck of which the steel rotor is installed. -
Page 7: Accesories
The product is intended for installing the smoke exhaust fan on flat or sloped roofs. Type PD strap-on roof fan base Fan - Type Type [mm] [mm] [mm] [mm] [mm] mcr Pasat 31 PD-31 4xM10 PD-35 mcr Pasat 35 4xM10 mcr Pasat 40 PD-40 4xM10 mcr Pasat 50... - Page 8 Type SO safety mesh Fan - Type Type [mm] [mm] [mm] [mm] [mm] [kg] mcr Pasat 31 SO-31 8x9.6 mcr Pasat 35 SO-35 8x9.6 mcr Pasat 40 SO-40 12x9.6 mcr Pasat 50 SO-50 12x9.6...
-
Page 9: Identification Marking
Product commercial name 7. INSTALLATION_____________________________________________ The mcr Pasat smoke exhaust fans are intended for rooftop installation outside of the fire zone it serves. 7.1. Pre-assembly inspection____________________________________________________ Each smoke exhaust fan is factory inspected by the manufacturer prior to packing and shipping. Upon unpacking the delivered smoke exhaust fan, visually examine it for any damage in transport. - Page 10 When installing the smoke exhaust fan, secure the installation site and all involved structures, and prepare passage and access ways for all personnel not involved in the installation. The smoke exhaust fan must be assured to enable inspection and servicing. Installation examples mcr Pasat fan mcr Pasat fan Type KS-V automatic non- return damper...
-
Page 11: Electrical Connections
7.3. Electrical connections_____________________________________________________ Having properly located, placed and fastened the smoke exhaust fan, connect the equipment to the relevant electrical system wiring. Lead the wiring through the gland and into the electric box on the fan casing; then connect the wiring to the terminals according to the diagram shown in the box. Each fan motor must be connected to the electrical power system over a safety switch. -
Page 12: Commissioning
8. TRANSPORT & STORAGE CONDITIONS __________________ During transport and storage, the mcr Pasat smoke exhaust fans are placed on pallets. Do not topple or throw the packaging during loading and transport. The smoke exhaust fans can be handled and shipped on any means of transport, provided that they are secured against weather and elements. -
Page 13: Maintenance & Servicing
“MERCOR” SA grants 12 months of warranty for the equipment quality from the date of purchase, unless the sales contract states otherwise. Submit each warranty claim to “MERCOR” SA in 7 days from the date of discovery of a warranty eligible defect Submit warranty claims by calling at: tel. - Page 14 13. Any circumstances listed in Item 10 will relieve “MERCOR” SA from the obligation of surety. The relevant provisions of the Polish Civil Code shall apply to all matters not regulated in these Warranty Terms & Conditions.
-
Page 15: Ventilator Measurement Report
Full name of the measuring technician Date measured Signature Return this Report immediately after completion of measurements to: MERCOR SA Fire Ventilation Systems Ul. Grzegorza z Sanoka 2 80-408 Gdańsk and not later than in 8 weeks from the date of equipment purchase (equivalent to the date of the VAT sales invoice).
Need help?
Do you have a question about the mcr Pasat and is the answer not in the manual?
Questions and answers