Hama 30 Operating Instructions Manual page 13

• If the setting is activated,
• If the setting is deactivated,
9.8 Screen saver
Select the time interval (10 seconds / 30 seconds / 1 minute) after which the screen saver is
activated. If you do not press a button during this time interval, the display switches off. Video
recording continues, however.
Select Off to deactivate this function.
• Navigate to the Screen saver menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).
9.9 Audio
With the mode activated, sound is recorded in addition to the video material.
• Navigate to the Audio menu item.
• Press [OK] (7) to activate/deactivate this setting.
• If the setting is activated,
• If the setting is deactivated,
9.10 G-sensor
With the G-sensor activated, the video file is automatically saved when vibrations occur (for example, in
the case of an accident). Here you set the sensor's sensitivity (Low / Medium / High) to vibrations.
Select Off to deactivate this function.
• Navigate to the G-sensor menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).
9.11 Automatic switch-off
Select the time interval (3 minutes / 5 minutes) after which the camera automatically switches off
if not in use.
Select Off to deactivate this function.
• Navigate to the Automatic switch-off menu item and confirm your selection by pressing [OK] (7).
A new overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).
is shown.
is shown.
is shown. appears in the display.
is shown.
11