Hama 30 Operating Instructions Manual page 12

9.3 Loop function
Select the time interval (1/2/3 minutes) after which a new video recording should begin.
Select Off to deactivate this function. Now only one file will be created.
• Navigate to the Loop function menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).
9.4 Motion detection
With motion detection activated, video recording is automatically started when the camera senses
vibrations (for example, in the case of an accident).
• Navigate to the Motion detection menu item.
• Press [OK] (7) to activate/deactivate this setting.
• If the setting is activated,
• If the setting is deactivated,
9.5 White balance
Improve the quality of the video recording through adjustment to the prevailing light conditions
(Sunlight, Cloudy, Tungsten light, Neon light).
If you select Automatic, the camera automatically adjusts the settings to the light conditions.
• Navigate to the White balance menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).
9.6 Contrast
Improve the quality of the video recording through contrast adjustment (-2/-1/0/1/2).
• Navigate to the Contrast menu item and confirm your selection by pressing [OK] (7). A new
overview window opens.
• Use the navigation buttons [◄] (9) / [►] (5) to select the desired setting.
• Confirm your selection by pressing [OK] (7).
9.7 Automatic video
With the mode activated, video recording is automatically started after the camera has been switched on.
• Navigate to the Automatic video menu item.
• Press [OK] (7) to activate/deactivate this setting.
10
is shown.
is shown.