Practical Advice; Cleaning And Maintenance - Eldom Sprint DA22N Instruction Manual

STEAM IRONING
Steam ironing with additional steam function is only possible with high temperature. The highest
temperature is marked on a temperature selector dial (7) with a red field.
Steaming will not work properly in case of other settings; the iron will spill water instead of
producing steam, and this is a normal situation which does not come under maintenance
service.
NOTICE. Steam is hot and there is a danger of burning. The soleplate heats very quickly but
it needs more time to cool down. It should not be touched.
FILING THE WATER TANK
Unplugging the iron ought to be preceded by filling the water container.
Use room temperature ordinary tap water or distilled water for ironing. Never use mineral water
or water containing too much lime or water destined for car batteries.
To fill the water tank use a special measuring cup, the shape of which is adjusted to water-fill
hole. Do not fill the water tank straight from the tap! While pouring water into opening remember
to stick to "MAX" level mark on the side of the water tank (5) and not to overfill..
WATER SPRAY
After filing the water tank you may sprinkle water on ironing surfaces by pressing spray
button (2).

PRACTICAL ADVICE

- use tap or distilled water
- marking lower temperature with temperature dial does not result in immediate temperature
reduction. Wait until the control light comes on again.
- dry iron at low temperatures
- the iron ought to be stored unplugged and without water,
- the water container ought to be carefully emptied before transporting. Once the water
container is emptied, it is advisable to place the iron on the surface which absorbs water for
a longer period of time in order to dry it completely

CLEANING AND MAINTENANCE

- before cleaning the appliance unplug it and wait until it cools down completely.
- the iron should not be immersed in water
- do not use abrasives or heavy duty wipes and sponges because they may destroy
the appliance
- the iron and soleplate should be wiped with moistened cloth, and later with clean
dry cloth.
CAUTION: The iron is not suitable
for regular use.
6