Advertisement
4
OPERATIONS & SPECIFICATIONS
OPERATIONS:
* POWER SWITCH MUST BE ON FOR THE SYSTEM TO BE OPERATIONAL.
s s Receiving a call from a sub station:
1. Sub station calls in with mono-electronic tone, heard as long as call button at sub is depressed.
2. LED light corresponding to calling station will light at master, staying on approximately 20 seconds.
3. Depress station button with lit LED.
4. Press TALK button to speak, and release to listen.
5. Press OFF button to the left of the station selector button when the call is concluded.
s s Calling a sub or master station:
1. Depress station number of the location you wish to call.
2. Press TALK to speak, and release to hear reply.
3. If you wish to send a pre-announce tone to the called station, press the CALL button. A mono-electronic
tone will be heard at the called station.
4. Press OFF button to the left of the station selector button when the call is concluded.
s s Receiving a call from another master station:
1. When one master calls another master, no station LEDs light up, and the responding master answers
back hands free. The calling master uses the TALK button to speak.
2. The "occupied lamp" will be on while the initiating master has a station selected.
3. The responding master should not press any buttons to respond to another master's call.
SPECIFICATIONS:
Power Source:
Power Consumption:
Communication Output: 300mW at 8 or 16 ohms (receive from subs and master to master)
Communication:
Calling:
Wiring:
Wiring Distance:
Dimensions:
Aiphone warrants its products to be free from defects of material and workmanship under normal use and
service for a period of one year after delivery to the ultimate user and will repair free of charge or replace at no
charge, should it become defective upon which examination shall disclose to be defective and under warranty.
Aiphone reserves unto itself the sole right to make the final decision whether there is a defect in materials and/or
workmanship; and whether or not the product is within the warranty.
This warranty shall not apply to any Aiphone product that has been subjected to misuse, neglect, accident, or
to use in violation of instructions furnished, nor extended to units which have been repaired or altered outside of the
factory. This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in
writing by Aiphone.
Aiphone will not be responsible for any costs incurred involving on-site service calls.
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
110V AC
45W (Max.), 4W (Standby)
10W at 8 or 16 ohms (transmit to subs)
Push-to-talk, release-to-listen (TALK button), hands free at sub station.
Master to sub or other master: By voice (TALK) or tone (CALL)
Sub to master: Call button on sub activates tone and LED at master,
remaining lit for approximately 20 seconds.
One pair homerun from sub stations
(Single call subs to nearest master, dual call subs to both masters)
2 pair plus one pair for each station; master to master
Twisted, Shielded cable is recommended.
510' with 22AWG; 1,225' with 18AWG.
AP-10MS/C: 10" x 11" x 5-1/2".
AP-20AS/C: 10-1/4" x 7" x 5-1/2".
TOLL FREE TECHNICAL SUPPORT:
E-MAIL: tech-serv@aiphone.com
AP-10AS/C: 10-1/4" x 7" x 5-1/2".
AP-40AS/C: 10-1/4" x 12-7/8" x 5-1/2".
WARRANTY
(800) 692-0200
TOLL FREE FAX LINE:
(800) 832-3765
Pg. 4
AP-MS/C Instr.
0698bkjd
Advertisement
