Vax Platinum SmartWash CDCW-SWXS Let's Get Started page 14

MAINTENANCE & CLEANING
Removing and cleaning the nozzle
IMPORTANT: Carpets should be dry vacuumed thoroughly before washing. This will prevent excessive build up of
dirt/debris in the nozzle. If the nozzle is fitted incorrectly, this will cause poor dirty water pick up.
Remove both tanks and
tilt the machine back.
Push the nozzle backwards
until it clicks into place.
14
Lift the nozzle release
clip and pull the nozzle
forward to remove.
Rinse the nozzle under
warm water (max 40�C)
to remove dirt/debris.
To replace the nozzle
align the tabs at the top
of the nozzle with the
machine.