Error Code - Philips SmartSleep User Manual

18
English
1 sec.
1 sec.

Error code

2 The sensor switches on and quickly shows an
animation of the sensor data and battery
indicator.
3 Sensor data point 1:
The response rate indicates how many times (in
percentage) you turned from your back to your
side after the sensor vibrated.
Press the activation button briefly again to see
the number of hours spent in bed.
4 Sensor data point 2:
The sensor shows how many hours you spent in
bed.
Press the activation button briefly again to see
the hours spent on your back.
5 Sensor data point 3:
The display shows the number of hours you
have spent on your back.
Note: The sensor will only save the data of your
last sleep session. If you use the sensor for the first
time the display shows '-.-' to indicate that there is
no data available yet.
Note: When the sensor shows one of the data
screens, the sensor switches off automatically
after eight seconds of inactivity.
The sensor may show A1 or A2 on the display.
indicates a session of less than one hour. The
sensor will not show any data for response rate
and the hours on your back.
Response rate.
Hours in bed.
Hours on your back.