Wearing Your Band; Pairing The Band With Your Phone - Huawei Band 4e Manual

Wearing your band

1
Attach and fix the body into the strap as shown in the following figure.
2
The strap is made of flexible materials. Adjust it before putting it on. If you need to adjust
the strap again after putting it on, put your middle finger between the layers of the strap,
then use your thumb and index finger to slide the buckle.
Your band is made of materials that are safe to use. If you experience skin discomfort
•
when wearing the band, stop using it and consult a doctor.
Be sure to wear your band properly to maximise comfort.
•
Keep the band and your skin dry and clean to prevent any damages caused by
•
moisture.

Pairing the band with your phone

Connect your band to the charging cradle to activate your band when using it for the first
time. The band is ready to be paired via Bluetooth by default.
Instead of pairing your band with the phone via Bluetooth directly, pair your band with the
phone using the Huawei Health app. Otherwise, your phone will not display the correct time
and step count.
For Android users:
•
1
Download the latest version of the Huawei Health app.
2
Open the Huawei Health app, go to Devices >
your band's name.
3
Touch PAIR and the app will automatically search for available devices. Once your band
is found, touch its name to start pairing.
4
Your band will vibrate when it receives a pairing request. Tap the touch key on your
band to start pairing.
For iOS users:
•
1
Download the latest version of the Huawei Health app.
2
Open the Huawei Health app, go to Devices >
your band's name.
3
Touch PAIR and the app will automatically search for available devices. Once your band
is found, touch its name to start pairing.
4
Your band will vibrate when it receives a pairing request. Tap the touch key on your
band to start pairing.
> ADD > Smart bands, and select
> ADD > Smart bands, and select
Getting started
2