Basketball Performance Tracking - Huawei Band 4e Manual

screen in the Huawei Health app to manually sync data. It may take a few moments to
sync data.
d
View data: Open the Huawei Health app and touch Exercise records to view new
workout data, including your running form monitoring data and professional running
advice.
Your Huawei Health app can sync workout data which lasted less than six hours
•
from the band.
To prevent your data from being lost, it is recommended that you sync your data
•
once a day.
Method 2: Starting a running session using the Huawei Health app.
To start a workout using the Huawei Health app, you need to bring your phone and band
with you all the time and ensure that both devices are connected properly, and the band is
in Foot mode.
a
Start running: Open Huawei Health, touch Exercise and enable Outdoor run or Indoor
run. A "Syncing workout data" icon
either running type.
b
Stop running: Touch the stop icon in the Huawei Health app to stop running.
c
View data: Open the Huawei Health app and touch Exercise records to view new
workout data, including your running form monitoring data, GPS workout routes (for
Outdoor run workout only) and professional running advice.

Basketball performance tracking

The basketball performance tracking feature is only supported on phones running
Android 4.4 or later.
1
Switch to Foot mode
a
When using the band for the first time, download the Huawei Health app and pair the
band with your phone.
b
Pinch the buttons on either side of the shoe attachment to open it. Insert the body in
the top of the case, align the metal contacts of the band body with those on the shoe
attachment. Buckle the attachment, then loop your laces through the space behind the
band body and tie it to your shoe. Please tighten the shoe buckle and note that
fastening the shoe buckle around too many or few laces may cause the shoe buckle to
become too loose. Finally, fasten the shoe buckle.
c
Then band will automatically switch to Foot mode and a running startup screen
will be displayed.
will be displayed on the band once you enable
Workout monitoring
10