CONTENTS CONTENTS ... PRECAUTIONS ...6 Preface ...6 Copyright ...6 Trademarks ...6 About this manual ...6 Symbols used in this manual ...6 WARNING ...7 SAFETY PRECAUTIONS ...9 Video camera notes ...9 Memory card notes ...9 LCD screen notes ... 10 Please read the following important information carefully before using this product ...
Page 3
Charging ... 15 Insert SD/SDHC Card ... 16 Turning On/Off ... 17 Setting Language and Date/Time... 18 Set Display Language ... 19 Set Date and Time ... 0 BASIC OPERATION ...1 Recording Movies ... 1 Zoom Function ... 1 White Balance... Shooting ...
Page 4
MENU SETUP ... Photo Setup ... Quality ... Exposure Metering ... HDR ... 4 Continuous Shot ... 4 Date Imprint ... 5 Movie Setup ... 6 Movie Resolution ... 7 Exposure Metering Modes ... 7 HDR ... 8 General Setup...
Page 5
CONNECTION ...49 Connecting to TV Output with HDMI ... 49 Connecting to a PC via USB ... 50 APPENDICES ...5 Specifications: eclipse EXPLORER ... 5 Error Messages... 55 Troubleshooting ... 57 Customer Care ... 58...
About this manual This manual provides you with instructions on how to use your AgfaPhoto digital video camera. Every effort has been made to ensure that the contents of this manual are accurate, however RedDot Imaging reserves the right to make changes without notice.
WARNING Do not expose the video camera battery pack or other accessories to rain or humidity to to reduce the risk of fire hazard or electric shock fire hazard or electric shock. For customers in the U.S.A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with part 15 of the FCC Rules.
SAFETY PRECAUTIONS Video camera notes: Do not store or use the video camera in the following types of locations: • In direct sunlight for a long period of time or high temperature (beyond 40ºC); • In environments with high magnetic fields; •...
LCD screen notes: Due to current LCD manufacturing technology, you may see a few light or dark pixels on your LCD. This is normal. These light or dark pixels will not affect the quality of the photo or video image. If the LCD screen is damaged, take particular care with the liquid crystal in the screen.
Water & Dust Proof Precautions Water & Dust Proof • The video camera meets JIS/IEC waterproof grade 8 (IPX8) and JIS/IEC dustproof grade 6 (IPX6). • The accessories included with the video camera are not for use in wet conditions. Precautions Before Using •...
Maintenance Precautions After Using • Wipe the video camera with a clean, dry lint free cloth. • When the SD cover or interface cover is opened, there may be water drops on the inside of the SD cover or interface cover and on the contact surface of video camera body;...
GETTING STARTED Accessories Your package should contain the video camera model you purchased along with the items below. If anything is missing or appears to be damaged, please contact our customer service department. Warranty Card USB Extension Cable Quick Guide AC adapter Wrist Strap CD-ROM...
Each Component Name LCD Screen Shooting Button Playback Button Up Button / Zoom in Button Left Button / Disp Down Button / Zoom out Button 18 USB/HDMI Card Slot Switch Right Button / White Balance OK Button / Record Button Wrist Strap Hole 10 Delete Button 11 Menu Button...
Charge and Insert SD Card Charge: This video camera has an internal battery. You can use the following three methods to charge the video camera: 1. Use the USB cable to connect the video camera with the adapter see figure (1); .
Insert SD/SDHC Card 1. Open SD Card Cover according to ① , ② ; . Insert SD Card according to ③ ; . Close SD Card Cover according to ④ , ⑤ . After opening the buckle on the SD Card Cover according to the arrow direction shown in the figure ①...
Turning On/Off Press the Power button to turn the video camera on/off. When the power is off, press the Power button for to turn the video camera on. When the power supply is on, press the Power button for to turn the video camera off. If there is no response on the video camera, press and hold the power button and the...
Setting Language and Date/Time Language, Date / Time setting menu will appear when turning the video camera on for the first time. Use the following procedures to set the camera to your preferences: 1. Press Power button to turn the video camera on. .
Set Display Language 1. Press button to enter the setting menu. . Press to select Press to select Language option. . Press button to enter the setting interface. 4. Press to select language of choice. Then press button to return to the menu;...
Set Date and Time 1. Press button. . Press to select Press to select Date / Time option. . Press button to enter the Set Date/Time program. 4. Press to select function option or select , press menu; Press to select the value; Or press button to return to the shooting screen.
BASIC OPERATION Movie Recording This function can take movies. 1. Press Power button to turn the video camera on. . Press button to begin taking video. . Press button to end the video shooting. Zoom Function Press button to zoom in or zoom out: •...
White Balance With White Balance, users can adjust the color temperature under different light sources to ensure correct color. Press button to scroll through the White Balance options, available options include: White Balance: Auto White Balance: Daylight White Balance: Cloudy White Balance: Fluorescent White Balance: Incandescent White Balance: Underwater...
Video Recording: 1. Battery status indicator . Memory card . During recording 4. The number of available photos 5. The number of photos have been taken 6. Image Quality 7. White Balance 8. Continuous Shot 9. WT Ratio 10. HDR 11.
Vertical 00:10:12 23/342 2010-07-17 09:13 Playback: 1. Battery status indicator . Previous photo/video . Selected film /image 4. Video file reminder display 5. Next photo/video 6. Shooting date and time 7. Ranking order/number of the current photos 8. Film length 00:10:12 2010-07-17 Horizontal...
PLAYBACK Preview Photos and Videos You can view photos and videos either vertically or horizontally when in playback mode. 1. Press button. . Vertical: Press previous /next photo /video; Horizontal: Press previous /next photo /video. . Play the selected video, press to enter the playback mode.
Page 28
When playing in the video mode, press button to return to Playback screen. In the Pause screen, press button to return to Playback screen. In the Playback mode, only the first frame is displayed on the video. Fast Forward display: x / 4x / 8x / 16x Fast Backward display: x / 4x / 8x / 16x.
Zoom in Photos In the Playback mode, images can be magnified up to 4x by using the function button. 1. Press button to return to the Playback mode. . Vertical: Press photo; Horizontal: Press select a photo. . Press button to magnify photos up to 4x See note below.
Screen Display in the Playback Mode Pressing button to display the following modes (the picture is displayed in horizontal position): Playback screen: When shooting, press the Playback mode; press to the Shooting screen. Thumbnail: When in the playback mode, press x thumbnails will display on the screen, pressing or video to be viewed.
Delete Photos and Videos In the Playback mode (Playback screen / Thumbnail / Date Folder / Date Folder Thumbnail) mode, pressing photo/video. 1. Press button to return to the Playback mode (Playback screen / Thumbnail / Date Folder / Date Folder Thumbnail). .
MENU SETUP Photo Setup Mode: Press button to enter Setup menu. 1. Select menu. . Press button to select the option in the Photo Setup menu or press to return to the Shooting screen. . Press the button to enter the options menu once you have selected an option within Photo Setup.
Quality The image quality menu adjusts the compression ratio of the images. Higher quality settings give better photos, but will take up more memory space. There are three options for Image Quality: Quality: Best Quality: Fine Quality: Normal Exposure Metering This specifies the area of the picture that the camera uses to correctly expose the picture.
HDR (High Dynamic Range) automatically takes multiple exposures of the same picture and overlaps them to lighten dark areas and darken light areas, thereby correcting exposing the picture. There are two options for HDR: • HDR: ON • HDR: OFF Continuous Shot Continuously hold down please release...
Date Imprint Saves the date and time data with the picture. There are three options for Imprint Date: • Imprint Date: Date / Time • Imprint Date: Date • Imprint Date: OFF...
Movie Setup Mode: Press button to enter Setup menu. 1. Press button to select . Press button to select the option in the Movie Setup menu or press to return to the Shooting screen. . Press button to enter the setting interface of corresponding options in the Movie Setup menu.
Movie Resolution Size setup refers to movie Solution ratio expressed in pixels. The Movie Resolution has five options: • 190X1080: 0FPS • 180x70: 60FPS • 180x70: 0FPS • 1440X1080: 0FPS • 640x480: 0FPS HD recording time limited to below 9min. Exposure Metering Modes Exposure Metering is used to setup an area for the exposure to be obtained.
HDR (High Dynamic Range) takes several exposes and overlaps them. This lightens darker areas of the photo and darkens lighter areas, thereby correctly exposing the picture. There are two options for HDR: • HDR: ON • HDR: OFF...
General Setup Mode: Press button to enter Setup menu. 1. Press button to select . Press button to select the options in the General Setup menu. . Press button to enter the menu of corresponding options in the General Setup menu.
Beep Setup Use Beep Setup to adjust the volume of beep when buttons are pressed. There are two options in Beep Setup: • ON • OFF LCD Brightness Use LCD Brightness to adjust the brightness of your screen. In the LCD Brightness screen, press button to select auto or different brightness ratio, press button to save the menu...
World Time When overseas, adjust the World Time setting to the time zone of the city nearest you. There are two options in World Time: • Location • Travel Target Power Saver Use the Power Saver function to prolong battery life between charges. The Power Saver function has two options: •...
Firmware Version Use this option to view the current Firmware version of the video camera. There are two options in Firmware Version: • FW Update (can update the version with the new version on SD card) • Cancel To check if there is a newer Firmware version available, please go to: www.reddotimaging.com.
Reset Use the Reset function to set the video camera to factory default values. The Reset has two options: • Yes • No Copy to Card Use Copy to Card function to copy the files stored in the internal memory card to storage card.
Playback Setup Mode: In Playback mode, Press 1. Select menu. . Press button to select the options in the Setup menu. The Playback Setup has three options: • Delete • Slide Show • Red-eye Reduction In the Playback mode, press Note this function will only display in the horizontal mode..
Delete Using this function will delete the photos/videos stored in the internal memory or storage card. The Delete has three options: • One • All • Date Folder Delete One: 1. Press button to select Delete option, press button to enter the setup interface.
Page 46
Delete all: 1. Press button to select Delete option, press button to enter the setup interface. . Select all options, press save the setting value and enter function selection interface. . Pres button to select Yes or Cancel to return to the menu. 4.
Slide Show This function displays images in sequence at regular intervals (internal memory card or storage). 1. Select Slide Show option, press to save the setting value to enter the function selection interface. . Press button to select Start or Cancel to return the menu.
Red Eye Removal Red Eye Removal 1. Press button to select Red Eye Removal option, press the setup interface. . Press button to remove or cancel to return the menu; press a photo. After pressing be overwritten. Red eye reduction does not work for video files.
CONNECTION Connecting to TV Output with HDMI Photos and videos can be viewed on a TV using the HDMI interface. By connecting to your TV with an HDMI cable (sold separately) the camera will automatically enter the Playback Screen. If the connection is unsuccessful an error message will display.
When video ( ) file appears on the Playback screen, pressing playing video. When playing video, the functions of playing video in the video camera (refer to P7). When playing video, press to pause first, then press return to the Single Playback screen. button will start/stop are the same as button...
Page 51
Connecting to a PC with USB Copy photos and videos in the video camera to a PC according to the following steps: 1. Open USB/HDMI port cover. . Push buckle to pop-up USB interface. . Use USB cable to connect the video camera with a PC (1) or connect USB connector with a PC directly ().
APPENDICES Specifications: eclipse EXPLORER Design and specifications are subject to change without notice. Active Image Sensor Pixels Total Image Sensor Pixels Focal Length [5mm film equivalent] F number Lens Lens Con- struction Focusing Range Anti-Handshake Digital Zoom Movie Number of...
Page 53
Shooting Modes Detection Features Red-Eye Removal Waterproof Shockproof Dustproof LCD Display ISO Sensitivity Exposure Metering Method Exposure Control Method AE Range Playback Modes Auto Face Up to 5m Up to 1.5m Equivalent to JIS/IEC (IP6X) .5inch (0k Pixels) Auto (100 ~ 800) Artificial Intelligence AE (AiAE), Center- weighted Average, Spot (Fixed to Center of Frame), Face AE...
Page 54
White Balance Control Continuous Shooting Recording Media Other Features Jacks Power Shooting Capability (Battery Performance) Operation Environment Dimensions (WxHxD) Weight Supplied Accessories Auto(AWB), Daylight, Cloudy, Fluorescent, Incandescent, Underwater Approx. 7.fps (Large/Fine Mode) Internal Memory: Approx. 6MB SD/SDHC Card (Up to GB Support) [Nonsupport MMC Card] Multi-Language Support (8 Languages) USB Arm, HDMI (Type C)
Error Messages Messages Warning! Battery ex- hausted No picture Pull USB out Connection failed File can’t be recognized Warning! Don’t power off when upgrading! Software update failed Explanation • Battery is depleted, connect the camera to a power source and wait until fully charged to resume using •...
Page 56
Messages Internal memory card full Memory card full Write protection of memory card File can’t be edited Memory card error The memory card is not formatted Battery exhausted, can’t update FW Explanation • The internal memory is full and cannot store any new files.
Troubleshooting Problem Possible causes Video camera • Battery low won’t turn on Video camera • Battery is discharged turns off suddenly while in operation Photo is blurred • Camera is not steady Can’t take • Internal memory or photos • The memory card is •...
Manufactured by RedDot Imaging, 75 NW 84thAve, Doral, FL 1. AgfaPhoto is used under license of Agfa-Gevaert NV & Co. KG or Agfa-Ge- vaert NV. Neither Agfa-Gevaert NV & Co KG nor Agfa-Gevaert NV manufac- ture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer.
Page 59
AgfaPhoto is used under license of Agfa-AgfaPhotovaert NV & Co. KG or Agfa-AgfaPhotovaert NV. Neither Agfa- AgfaPhotovaert NV & Co. KG nor Agfa-AgfaPhotovaert NV manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer. For service, support and warranty information, contact the distributor or manufacturer.
Need help?
Do you have a question about the eClipse Explorer and is the answer not in the manual?
Questions and answers