Advertisement
Calibration MANUAL
GB
1. THE FIRMWARE UPGRADE
A) HOROTEC
HOROTEC
Firmware can be downloaded via HOROTEC
connection. For the HOROTEC
download the HOROTEC
via Internet www.horotec.ch.
B) Downloading HOROTEC
To open the next menu (See figure below), click on the Support
menu of the website www.horotec.ch (NOTE : internet connection
is essential for this operation!)
C) Downloading the application SOFTWARE
Click on the FLASHTEST PC Application Installer you can find on
the Horometer website (www.horotec.ch) (NOTE : Some browsers
such as Chrome, do not support downloading from the Internet.
If the download does not succeed, check your browser and use
Internet Explorer or Mozilla Firefox.)
D) FIRMWARE UPGRADE
HOROTEC
documentation available at the time the package was assembled.
There may be newer software available or dependencies that
require special attention to product version number. To ensure
proper installation, operation checks online documentation from
the web site www.horotec.ch before using the product. The download
of new software versions via internet is simple, quick and free of
charge :
1) Switch ON and connect your HOROTEC
PC with the special cable available optionally.
Flashtest - Connection PC
©
©
Flashtest can be connected to a PC and the
©
Flashtest contains the latest software and
©
Flashtest - PC connection,
©
Flashtest PC Application Installer
Flashtest FIRMWARE
©
4
©
Flashtest - PC
©
Flashtest to the
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Horotec Flashtest
Summary of Contents for Horotec Flashtest
- Page 1 (NOTE : internet connection is essential for this operation!) C) Downloading the application SOFTWARE Click on the FLASHTEST PC Application Installer you can find on the Horometer website (www.horotec.ch) (NOTE : Some browsers such as Chrome, do not support downloading from the Internet.
- Page 2 2) Start the FLASHTEST Application Program on your PC (Application Program : you can download it via Internet. See Support menu : FLASHTEST PC Software) 3) Click on Tools menu and select Firmware Upgrade. The appeared buttons are Browse and Download. (The Browse is suitable to find and download the saved firmware.
- Page 3 • Switch ON the HOROTEC © Flashtest with the right button then press down the two buttons simultaneously and release simultaneously. The display shows the INFO menu. • Press once the right button and select the CALIBRAT menu. • Connect the optionally available “calibrator” unit to the ©...
Need help?
Do you have a question about the Flashtest and is the answer not in the manual?
Questions and answers