Troubleshooting - Eastwood 31464 Instructions Manual

TROUBLESHOOTING

PROBLEM
Inverter Turns
Off While
in Use
No Output
Voltage
Incorrect
Output Voltage
Inverter
Cannot
Power Load
The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com
© Copyright 2018 Easthill Group, Inc.
CAUSE
Overload
Internal
Overheating
Low / High
Input Voltage
Loose /
Improper
Connections
Incorrect Input
Voltage
Excessive Load
Power Cable
Undersized
Starting
Wattage of
Appliance is
Too High
If you have any questions about the use of this product, please contact
PDF version of this manual is available at eastwood.com
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
800.343.9353 eastwood.com
CORRECTION
Turn off all devices and determine which device
is causing the overload situation. Reduce load to
less than rated power.
Allow Inverter to cool for a minimum of 30
minutes. Ensure the cooling fan is not blocked
and the Inverter has ventilation.
Ensure input voltage is within the specified range.
Ensure all connections are correct and tight.
Ensure input voltage is within the specified range.
Reduce load level.
Ensure power cables are appropriately sized.
Reduce load from other devices or change
appliance.
6/18 Instruction item #31469Q Rev 4