Operation; Maintenance - Eastwood 31464 Instructions Manual

OPERATION

To prevent damage, do not attempt to power a device, or a combination of
devices, that require more than the rated output of the inverter.
• With the device(s) switched off, plug device(s) into the inverter receptacle.
• Turn inverter switch on and look for the green LED to illuminate.
• Turn device one at a time as needed while listening for the overload and/or low voltage
alarm to beep.
If the Inverter is powered by a vehicle's starting battery, be careful not to
discharge the battery to a point that it will no longer start the engine.
If necessary, operate Power Inverter while the vehicle is running.
• Turn off power inverter after each use.

MAINTENANCE

IMPORTANT NOTE: The following maintenance should be performed before each use.
• Check tightness of all connections
• Check power cables and ensure that they are in good shape.
• Ensure all 120 volt devices are turned off before turning on inverter.
• After each use, wipe inverter clean with a dry cloth to prevent dust build up.
To order parts and supplies: 800.343.9353 >> eastwood.com
7