Advertisement
2. PACKAGE CONTENTS & ASSEMBLY
2.1.
Carton Content
2.1.1. Carefully unpack the carton content and view the main body of the vacuum cleaner.
2.1.2. Locate the two side clips which hold the motor head in place (fig 1).
2.1.3. Undo the clips, remove the motor head and take out the contents of the tank.
2.1.4. Check and identify each component as listed below. If anything is missing or damaged please contact your supplier immediately.
2.2.
OPTIONAL CLEANING KIT.
For use as an industrial dry carpet cleaner, or wet carpet extraction cleaner in "Stand Up" mode, you will need to order kit VMA912/CL10,
which fits all models covered by these instructions (fig 2).
3. DRY VACUUM CLEANING
# WARNING! Ensure you read, understand and apply chapter 1 "Safety Instructions". Reminder: DO NOT vacuum hazardous dust or
other substances. Use of an incorrect filter will invalidate your warranty. The green pump switch will operate independently of the
vacuum motor. Only press this switch if using the machine as a WET vacuum cleaner (see chapter 4).
To use the machine as a "DRY" car fabric cleaner, (no liquids involved), proceed as follows:
3.1.
Ensure the machine is unplugged from the mains power supply.
3.2.
Remove the motor head, and remove the detergent tank. Fit the dry cartridge filter (figs 4, 5, 6),
if not already assembled.
3.3.
Attach the plastic connector to the inlet of the paper dust bag (fig A). Fit the paper dust bag onto the
inside of the vacuum intake pipe (see fitting instructions on side of bag) fig B.
3.4.
Reposition the head onto the drum body ensuring that the switches face forward, and clip in place.
3.5.
Connect flexible hose to the front inlet on the tank.
3.6.
Attach the appropriate end nozzle: Flat or Tapered Nozzles.
3.7.
Plug in to power supply, and PRESS THE BLACK MOTOR "ON" SWITCH ONLY. DO NOT TOUCH THE
GREEN PUMP SWITCH (fig 7). You are now ready to use the Auto Valet machine as an ordinary
vacuum cleaner for vacuuming car interiors.
3.8.
When you have completed vacuuming, switch the BLACK MOTOR SWITCH "OFF", and unplug from mains.
3.9.
Regularly check the dust bag and remove when it is 2/3 full. Seal bag opening with the cap attached and
dispose of the bag. The bag is manufactured so that air, not dust, will filter through the paper
and as such the dust bag must not be reused.
3.10.
If you wish to use the machine for a wet application and the dust bag is less than 2/3 full, carefully
remove the bag, store for future use, and wipe the tank clean.
fig A
fig B
LIST OF CONTENTS.
Item
Part No
1
VAC/92/DL
2
186/83035BHB
3
186/50318BHN
4
186/01333BHN
5
186/01300BON
6
186/89051FHI
7
186/83015BOI
8
186/60252BON
9
186/01330BHN
10
186/60250BON
11
VMA911 or 912
LIST OF CONTENTS.
Item
fig 2.
1
2
3
4
5
6
7
8
9
fig 7
fig 1.
Description
Cartridge filter
Foam filter
Clips (x6)
Detergent delivery pistol system
Flexible hose
Bottle shampoo & funnel
Dust bag
100mm Pick up nozzle
Small valeting tool
Narrow pick up nozzle
Main body
Part No
Description
186/40035BHM
Stainless steel tubes
186/50372BHN
Adaptor for large nozzle
186/60278BON
Brush for liquids
186/01331BHN
Rubber washing nozzle
186/60281BON
Frame for multi purpose brush
186/30094BSX
Bristle strip
186/70071BHN
Rubber strip
186/95001FON
Carpet brush with articulated
head for dry carpet cleaning
186/60255BON
Round brush
fig 4
fig 5
fig 6
VMA911 - VAM912 - 4 - 051006
Advertisement
