Introduction; Before Use; Intended Use; Height Adjustment (If Applicable) - aidapt VP155 Usage And Maintenance Instructions

INTRODUCTION

Thank you for deciding to purchase the Walking Stick from Aidapt. When used
correctly they are designed to give many years of reliable trouble-free service.

BEFORE USE


Carefully remove all packaging. Avoid using any knives of other sharp
instruments as this may damage the surface of the walking stick.

Check the product for any visible damage. If you see any damage or
suspect a fault, do not use your product, but contact your supplier for
support.

If you have purchased a folding/collapsible walking stick, check that it
is properly and securely clipped together.

With some models it is possible to adjust the height of the walking
stick. In this case, where possible, please consult a doctor,
physiotherapist or your retail outlet to check the correct height for you.

INTENDED USE

The walking stick is designed to support the user whilst walking.

HEIGHT ADJUSTMENT (IF APPLICABLE)

1. Grip stick shaft with one hand whilst pushing the metal locking pin
down with the other hand so the locking pin retracts fully into the shaft.
2. Select required height by adjusting the top section of the shaft in an
upwards or downwards motion and release the metal locking pin in
front of the required hole position.
3. Prior to use always ensure that the locking pin fully protrudes from the
selected hole position and by applying downward pressure on the
handle of the walking stick test that the walking stick has been
assembled correctly.

CLEANING

Clean your Walking Stick using a non-abrasive cleaner or mild detergent with
a soft cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may
seriously damage the product beyond repair and should not be used. Always
ensure that you wipe dry the equipment after cleaning.
Usage and Maintenance Instructions
2
Ver. 3 08/2012 (1718)