Advertisement
Quick Links
soldering/burning temperature setup
foam cutting temperature
This instruction is created as scalable vector graphics.
If you want to see detailed view you can zoom with no
decrease of quality.
All of used components in current assembly step are
marked with yellow colour.
This instruction is also Grayscale printer friendly
3DSIMO KIT 2 is Open-Source project.
You may find assembly part with different geometry
according to this instruction or product pictures.
If you have any questions, feedback or idea for improvement,
you can contact us via support@3dsimo.com
KIT 2 - ASSEMBLY MANUAL
CONTROLS
soldering/burning - on/off
foam cut - on/off
INSTRUCTION TIPS
DESIGN CHANGES
nozzle temperature setup
retraction
extrusion
Advertisement
Related Manuals for 3dsimo KIT 2
Summary of Contents for 3dsimo KIT 2
- Page 1 This instruction is also Grayscale printer friendly DESIGN CHANGES 3DSIMO KIT 2 is Open-Source project. You may find assembly part with different geometry according to this instruction or product pictures. If you have any questions, feedback or idea for improvement,...
- Page 2 KIT 2 MAIN BODY double button Main_Body Body Lock PTFE Tube Electronics double button ring attach Double Button ring on the Double Button insert button into the Main Body insert PTFE tube into the PCB holder insert Main Body Electronics into the MainBody plastic part...
- Page 3 KIT 2 3D PEN ADAPTOR double button metal screw single button body locks extruder motor double button ring PTFE tube single button ring spring nozzle holder plastic part plastic part plastic part plastic part 3D pen electronics 3D_RIGHT_PLA 3D_LEFT_PLA 3D_LEFT_ABS...
- Page 4 KIT 2 3D PEN ADAPTOR Insert buttons into assembly insert assembled body locks with spring into the body assemble both halves into one body drive the screw and and secure the whole assembly plug 3D pen adaptor into the main body...
- Page 5 KIT 2 SOLDERING/BURNING ADAPTOR 2x metal screw burning electronics 4x - Body_Lock 2x - Burning_Soldering_L 2x Single_Button 3x - Burning tips 1x - Soldering tip soldering electronics 2x - Spring 2x - Burning_Soldering_R 2x Single_Button_Ring insert electronics into the Burning_Soldering_Left plastic part...
- Page 6 KIT 2 FOAM CUTTING ADAPTOR metal screw Foam_Cutting_L 2x - Body_Lock resistance wire Single_Button Foam Cutting Electronics Foam_Cutting_R Spring Single_Button_Ring snap the Single_Button_Ring onto the Single_Button insert electronics into the Foam_Cutting_Left plastic part insert assembled button into the body slide assembled body locks with spring into the body...