Download
Share
Print this page
3dsimo MINI User Manual
  1. Manuals
  2. Brands
  3. 3dsimo Manuals
  4. Accessories
  5. MINI
  6. User manual

3dsimo MINI User Manual

Hide thumbs

Advertisement

Quick Links

MINI MANUAL

Advertisement

loading

Related Manuals for 3dsimo MINI

Summary of Contents for 3dsimo MINI

  • Page 1 MINI MANUAL...

  • Page 2: Instructions For Use

    3D SIMO MINI Instructions for use...

  • Page 3: Table Of Contents

    3D SIMO MINI Content: Introduction of 3Dsimo mini The content of the packaged product Basic description of the 3Dsimo mini Mobile APP Procedure for operating and replacing 3Dsimo mini extensions Maintenance Warning Specifications Certification Claims...
  • Page 4 1. Introduction of 3Dsimo mini You have got your hands on a pocket workshop. This is the 3Dsimo mini, which includes replaceable extensions drawing, welding, cutting, burning). Each extension has logic for its detection and a setup of all parameters so that you only need to insert the extension.
  • Page 5 Strong recommendation from the manufacturer: Before using the 3Dsimo mini, please read the instructions carefully and pay attention to warnings. If you need inspiration or are having issues, visit our website:...
  • Page 6 2. The content of the packaged product The packaged product includes the following components: 1 mini 3Dsimo with 3D drawing extension 1 connecting extension 1 burning extension 1 cutting extension 1 Adapter + USB cable 1 15m of the drawing filament...
  • Page 8 3. Basic description of 3dsimo mini Material/temperature selection buttons (depending on the chosen extension) The buttons used for inserting / ejecting / heating (depending on the chosen extension) USB power connector Magnetic contacts for attaching accessories Contact for power pack and other...
  • Page 9 AB S...

  • Page 10: Mobile App

    Mobile App The Mobile App can be downloaded for Android, IOS, Win. Android Windows...
  • Page 11 3D pen will be displayed on the LED display and then the specification of what extension you should insert in the 3Dsimo mini. If you do not have any extension inserted, the text UNSPECIFIED will appear. Always insert the extension to the stop (Fig.
  • Page 13 HEATING is displayed. After reaching appropriate temperature (2-3min), READY displayed. Now the feeder mechanism is already activated and you can insert the filament of the 3Dsimo mini (Note: Always insert a straightened filament, which has a blunt end as in Fig. 5).
  • Page 14 (Figure No. 6); at the same time you need to gently push the string to get it into he feed mechanism. Then it takes approximately seconds before the wire reaches the nozzle and the material starts flowing from the 3Dsimo mini.
  • Page 15 B) SPECIAL FEATURE After pressing both buttons simultaneously for at least 2-3 sec., continuous extrusion will be activated...
  • Page 16 (Fig. no. 7). To disable this feature, press any front button. 2-3s...
  • Page 17 Pressing the button for reverse running and hold it until the entire string comes out. Then, remove the string and insert another one with a flat end (Fig. No. 8). (Remove the filament only after warming up the 3Dsimo mini and activating the feed mechanism!)
  • Page 18 EXTENSIONS FOR WELDING, CUTTING AND BURNING: After inserting any extension, you’ll see its name on the display and then the temperature indicated in percentages. 100% corresponds to 480°C. For preheating it is required to hold the front button. To enable continuous preheating, press both front buttons simultaneously for at least 2-3 sec.
  • Page 19 REPLACEMENT OF TIPS AND EXTENSIONS FOR BURNING AND CUTTING: For proper replacement, refer to Figure No 9. It is always necessary to carefully (Replacement tighten everything! of tips can only be carried out after cooling!)
  • Page 20 FITTING AND REPLACING THE RESISTANCE WIRE FOR THE CUTTING EXTENSION: For proper replacement refer to Figure No. 10.

  • Page 21: Maintenance

    If the tip or end is not smooth and flat, cut the distorted portion with scissors. B) After using the 3Dsimo mini, always pull out the material and keep it in a resealable bag. C) If the deformed wire slides inside 3Dsimo mini and it can’t be pushed...
  • Page 22 product into the bottom hole, which will cut the filament in half. Now you can insert and remove the deformed plastic. D) If the nozzle is dirty, wipe with a paper towel. (! Beware hot!)
  • Page 23 SOLDERING AND BURNING EXTENSION: A) When the tip is dirty, wipe with a paper towel. B) Never try to get rid of dirt using a knife or sandpaper. This would damage the special coating for easy soldering. C) When replacing the tip, always make sure to tighten all components (because of contact)
  • Page 24 CUTTING EXTENSION: A) When the wire is dirty, wipe with a paper towel. B) If the wire breaks, always use new wire. (Always use original resistance wire from 3Dsimo!)

  • Page 25: Warning

    Warning Risk of burns. 3dsimo mini nozzle and tips reach high temperatures up to 480°C after heating. Do not touch the nozzle/tips or parts in their vicinity, or molten plastic, there is a risk of burns. Hot parts are shown in Figure No. 12.
  • Page 26 Never remove the 3D drawing extender if no filament is inserted. Shown in Figure No. 13.
  • Page 27 Avoid contact volatile flammable substances with the hot nozzle/tip of the 3Dsimo mini. Inform those around you that the device is hot and should not be touched. Allow the nozzle/tip of the 3Dsimo to cool completely before storage. In the...
  • Page 28 Otherwise, the 3Dsimo mini may get damaged due to poor quality or incorrect width. Other damage may be caused. The manufacturer is not liable for damage caused by the use of non- genuine material.
  • Page 29 G) Keep the 3Dsimo dry during storage, transportation and operation as well as avoid contact with liquids. H) Do not disassemble the 3Dsimo mini power adapter. In the case of defects contact an authorized service center for assistance or repair.

  • Page 30: Specifications

    Specifications ADAPTER: Input voltage: 100 – 240V AC, 50Hz Output power: 12W, Output voltage: 5V 3DSIMO MINI: Input voltage 5V NOISE LEVEL: 21 – 30 dB...

  • Page 31: Certification

    Certifications RESTRICTION OF HAZARDOUS SUBSTANCES This device complies with the European Directive on Registration, Evaluation, Authorization Restriction Chemicals (REACH) (Directive No. 1907/2006/EC European Parliament and the European Council) and the European Directive on the Restriction of Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) (Directive 2002/95/ EC of the European Parliament and the...
  • Page 32 COMPLIANCE WITH EUROPEAN SAFETY STANDARD This device complies with European safety directives.
  • Page 33 Claims A warranty of 12 months is provided for the equipment. In the event of any defect or failure of the device, you can complain at: Info@3dsimo.com. The original material can be purchased here: www.3dsimo.com/e-shop More information at...