Advertisement
Quick Links
Operation Manual
Hot Glue Gun
61858
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Summary of Contents for WilTec 61858
- Page 1 Operation Manual Hot Glue Gun 61858 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Max. power consumption (W) 80 Preheating time (min) 3–5 Fluid quantity (g/min) 9–16 Glue stick diameter (mm) 11.2 Glue stick type Hot-melt adhesive Protection class Weight (kg) 0.35 © by WilTec Wildanger Technik GmbH Item 61858 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 4 11. After the gluing process has been completed, place the device back in the charging station. Never place the device on its side while it is connected to the mains! © by WilTec Wildanger Technik GmbH Item 61858 Page 4 http://www.WilTec.de...
- Page 5 Make sure that all parts of the unit have cooled down completely before storage. Never wrap the power cord around a device that has not cooled completely. Store the device safely in a dry place out of the reach of children. © by WilTec Wildanger Technik GmbH Item 61858 Page 5 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 6 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.