Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Imax B5
Summary of Contents for Imax B5
- Page 1 li-ion/Polymer Balance Charger Manual ROHS RoHs Certification...
- Page 2 Thank you for purchasing the imax B5.You get a rapid charger that is computerized with a high performance microprocessor and specialized operating software. It can maintain your battery at its best condition and also control them safely. Please read this entire...
-
Page 3: Special Features
Voltage balancer for Li-polymer battery inside High-power and high-performance circuit B5 has an individual-cell-voltage balancer inside. B5 employs the circuit that has maximum output So it does not need any balancer separately when power of 50w. As a result it can charge up to 14 charging Lipo battery for cell balancing. -
Page 4: Warning And Safety Notes
li-ion/Polymer Balance Charger Warning and safety notes Never leave the charge unsupervised when it is Do not connect more than one battery pack to connected to its power supply.lf any malfunction the charge lead at any one time. is observed immediately terminate the process Do not attempt to charge or discharge the and refer to the operation manual. -
Page 5: Program Flow Chart
li-ion/Polymer Balance Charger Program flow chart --Did you set up adequate current for charging or Li-poly charge li-ion/poly Start enter program charging discharging? Batt type stop --Lithium battery pack can be composed with parallel and series circuits mixed.You have to Li-poly Li-poly Start... -
Page 6: Initial Parameter Set Up
Balance Charger Initial parameter set up B5 will be operated with the This informs you of its designation USER SET PROGRAM default value of the essential user Start Enter settings when it is An optional feature using temperature probe contacting the... - Page 7 li-ion/Polymer Balance Charger Lithium polymer battery program These programs are only suitable for The value on the left side of charging and discharging Lithium-polymer LiPo CHARGE second line sets a charge 2.OA 11.1V(3S) batteries with a nominal voltage of 3.7V/cell. current and the value on the These batteries need to adopt different right side of second line sets...
- Page 8 li-ion/Polymer Balance Charger Charging Li-Poly battery at balancing mode This is for balancing the voltages of The value on the left side of LiPo CHARGE Lithium batteries of the battery pack second line sets a charge current 2.OA 11.1V(3S) and the value on the right side of to be charged.
- Page 9 li-ion/Polymer Balance Charger NiMH/NiCd battery charging program These programs are for charging NiMH This program simply charges NIMH CHARGE (Nickel-Metal-Hydride) or NiCd the battery using the current CURRENT 2.0A you set. The charge current (Nicdel-Cadmium) battery commonly ranges from 0.1 to 5.0A. used for R/C model applications.
-
Page 10: Warning And Error Messages
The voltage of input power lowers the limit. IN VOLTAGE ERR B5 incorporates a various functions of protective and monitoring the system to verify functions and The voltage of lithium battery pack the state of its electronics. In any case of was selected incorrectly. - Page 11 IMAX B5 li-ion/Polymer Balance Charger IMAX B5...
- Page 12 Balance Charger IMAX B5 (16chr.x2lines) (DC11-18V) BATT TYPE/STOP Delta-peak sensitivity DEC/INC (4mm banana female) 11-18...
- Page 13 li-ion/Polymer Balance Charger Li-poly charge li-ion/poly Batt type stop Li-poly Li-poly Batt type stop NIMH NiMH Batt type stop NICd Nicd Batt type stop Batt type stop...
- Page 14 Balance Charger USER SET IMAX B5 PROGRAM Start Enter TEMP CUT OFF (IMAX B5 SAFETY TIMER 10min START/ENTER CAPACITY CUT OFF DES INC 5000mAh START/ENTER KEY BEEP BUZZER INPUT POWER LOW CUT OFF 10.7V BACK LIGHT...
- Page 15 li-ion/Polymer Balance Charger LiPo CHARGE 3.7v 2.OA 11.1V(3S) START/ENTER 0.1--5.0A Batt type stop 1--5 S:3SER R:3SER "R": CONFIRM(ENTER) 3.7 v "S": 4.2v start/enter B A T T E R Y TYPE/STOP START/ENTER BL3S 1.2A 12.59V B A T T E R Y 022:43 00682 TYPE/STOP...
- Page 16 li-ion/Polymer Balance Charger NIMH CHARGE CURRENT 2.0A , Star/Enter : 0.1-5.0 Batt type stop : 1-5 V ) S:3SER R:3SER "R": CONFIRM(ENTER) "S": START/ENTER B A T T E R Y TYPE/STOP BL3S 1.2A 12.59V B A T T E R Y 022:43 00682 TYPE/STOP...
- Page 17 li-ion/Polymer Balance Charger 4.17V 4.17V 4.19V 0.4A 0.00V 0.00V DEC/INC NIMH CHARGE CURRENT 2.0A (NiMH) 0.1-- (NiCd) 5.0A Batt type START/ENTER stop DES INC NIMH 2.0A 7.42A B A T T E R Y START/ENTER 022:45 00890 TYPE/STOP Pb6s CHARGE 4.OA 12.0A 0.1--5.0A...
- Page 18 Balance Charger IN VOLTAGE ERR IMAX B5 VOL SELECT ERR BREAK DOWN Reversed polarity BATTERY CHECK LOW VOLTAGE Connection break BATTERY CHECK OVER VOL TAGE Li-poly SHOT ERR BATTERY VOL ERR...
Need help?
Do you have a question about the B5 and is the answer not in the manual?
Questions and answers