balcom TLT 06 Operating Instructions Manual page 4

...Example
Here is a practicle example to demonstrate how the
programming functions.
The situation is assumed as follows
The TLT 06 is connected to the internal extension
number 224 of a PABX telephone system. From the
TLT 06 Door station 3 separate internal offices and
one external Line office can be called. *
Button No. 1: office A
Button No. 2: office B
Button No. 3: office C
The Door-opener should be operated with the
default setting "00" .
Technical Data :
Operating Temperatur
Extension voltage (a/b)
Extension current (a/b)
Idle current
Ring voltage
Tone dialing / MFV
Pulse dialing / IWV
Door opener switch
Number of memories
Memory capacity
*
The TLT06 is only permitted to be connected to the external
State Line through the use of a PABX telephone system with
an electronical couple field.
E-mail: info@balcom-electronic.de • Internet: www.balcom-electronic.de
:
*
1
231
232
2
233
3
- 25 to + 50 °C
10 - 48 V
15 - 60 mA
< 60 µA
27 Vpp, ± 20%
max. 90 Vpp, 20...60 Hz
100 ms / 100 ms
40 / 60 ms
max. 24 V / 1,5 A AC / DC
6
max. 32 digits for each memory
balcom electronic GmbH
Albaumer Str. 33
D-57399 Kirchhundem-Würdinghausen
Phone +49 27 23 / 71 65-0 • Telefax +49 27 23 / 71 65
Lift the Handset of any telephone on the PABX.
Dial the Internal extension number of the TLT 06
2 2 4 224
Dial (*) Pin-Code (*)
2 2 2 2
*
Default setting ex works is:
Memorizing telephone number's
Programm memory No. 1 with telephone No. 231
2 3
1
* *
2 3 2
Programm memory No. 2 with telephone No.
* *
Programm memory No. 3 with telephone No.
2 3 3
* *
Electrical Door-opener
with
8 0 0
* *
Finalize Programming
#
Replace the handset ( on-hook )
Germany
and wait until aconnection is built up.
2 2 2 2
0
Default setting
-29
Technical specifications or details are subject to change without notice
232
233