Advertisement
4. ASSEMBLY
4.1.
FIT WORKTOP
4.1.1.
The only assembly required is to fit the worktop supplied separately and the door handles (if applicable).
4.1.2.
Fit worktop by screwing from underneath using 4 x hex flange bolts (see fig.1) or 6 x hex flange bolts for 60" wide models (see fig.2).
4.2.
FIT HANDLES
4.2.1.
Handles screw on from the rear, using cross head screws (see fig.2).
4.3.
REMOVE DRAWERS (if applicable)
4.3.1.
Pull drawer out fully and push black lever in each drawer runner up or down, then pull out drawer to release (see fig.1).
fig.1
4.4.
4.5.
.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
Original Language Version
fig.2
sales@sealey.co.uk
APmS01, APmS02, APmS03, APmS04 | Issue:3 (H,F) 15/01/19
www.sealey.co.uk
Advertisement
