Advanced Bionics Naida CI Connect Quick Manual

DEVICE DESCRPITION
The Naida CI Connect allows streaming of calls or music via Bluetooth® directly to your Naida CI Q90
sound processor. With built-in microphones that pick up your own voice for phone calls, you can enjoy
hands free calling. Naida CI Connect works with Android™, iOS, and any feature phone, along with all
Bluetooth®- enabled tablets, laptops, and MP3 players.
Configuration of Naida CI Q90 in
SoundWave 3.2
Default program: Ensure RogerReady is enabled
in slot 1. This ensures that Naida CI Connect will
automatically switch into streaming mode any time
a streaming signal is received. The sound
processor will automatically revert back to the full
microphone 20 seconds after streaming has ended.
AUX only program: Should the patient wish to hear
no environmental sound from the Naida CI Q90
microphones, then a manual Connect/Roger
program should be added with an AUX only input
source. .Accessing this program requires a manual
program change on the Naida CI Q90.
TIP
Naida CI Connect requires the PowerCel 170
battery
INITIAL PAIRING TO A BLUETOOTH®-
ENABLED DEVICE
1 On your device (e.g. phone), ensure that
Bluetooth is enabled, and then search for
Bluetooth-enabled devices in the connectivity
setting menu.
Attach Naida CI Connect to your sound
2
processor. You now have 3 minutes to pair
your Naida CI Connect with your device.
Your device shows a list of Bluetooth-
3
enabled devices. Select the 'Naida CI
Connect' from the list to pair the devices. A
beep confirms successful pairing.
TIP
Once paired to your device, Naida CI Connect will
automatically connect again. Naida CI Connect
can be connected to one device at a time.
Naida CI Connect
PHONE CALLS
Making a Call: Dial the number on your phone. You
will hear the dial tone through your sound
processor.
1. Connector to Sound Processor
2. Microphones
3. Button
Naida CI Connect Button Function
Bluetooth
Phone
Calls
Short
Press Accept
(less than Call
2 sec.)
Long
Reject
Press
incoming
(greater
call OR
than 2
End call
sec.)
*Accepting, ending and rejecting calls can also
be completed on your phone.
TIP
A phone call always has highest priority and will mute
music or audio streaming. A Bluetooth music stream
has priority over TV Connector streaming. To switch
back to the TV Connector streaming, simply stop the
music streaming on your smartphone or other audio
streaming device.
CAN'T FIND WHAT YOU NEED?
CONTACT US!
877-829-0026
QUICK GUIDE
Bluetooth Using TV
Audio Connector
N/A N/A
Stop Mute or
movie or unmute
music signal from
streaming TV Connector
Contact Us