Advantek Networks ATV-TUNER-FV Quick Installation Manual page 7

Install Driver (Windows Vista)
Before install the driver in Vista OS, you must enable Sound's Line in function. Please follow
the below procedures to check if the Line in function is enable or not.
(1) Go to "Start" "All Programs"
(2) Click "Sound" option.
(3) In "Recording" tab, you must make "Line in" as default setting. And then, click
"Properties" to check the settings. (If the Line in is not default setting, select "Line in" and
click "Set Default" button to change the default)
(4) In "Line In" properties, make sure Line in function can't be mute
value can be any number (1-100), except 0.
Step1. After complete hardware installation, turn on your system and boot into windows.
When operation system detects TV capture card, "Found New Hardware" window
will appear, then click "Cancel".
"Control Panel"
. And Line in balance
7