Checklist Pre Delivery (Pdi) - Bajaj Dominar 400 Service Manual

Checklist Pre Delivery (PDI)

Lista de revisión de PDI común a todos los modelos (Los pares de ajuste dados son de Domina 400)
Name of Distributor
Model
Chasis no
Motor SN
1. Checkpoints before starting the vehicle
Check and correct the following before starting the vehicle
Check
Oil level between upper and lower / Fill marks if necessary with
Motor oil
the vehicle parked on a level surface.
Tank / pipe Comb.
No leaks
Mirrors Accommodate and adjust to ensure a clear rear view.
Coolant level between the mark of the MIN and MAX levels,
filled if necessary with cold engine and with the vehicle parked
Coolant
on a levelsurface. Make sure there are no leaks
Locks operation Ignition lock, seat lock, left side cover lock and fuel tank cap.
Terminal voltage: 12.4 V DC for maintenance-free battery and 12.8 V DC
for VRLA sealed using the battery tester adjustment battery terminals /
cables.
Battery
Apply petroleum jelly to the terminals
Forward: 29 PSI (2.03 kg / cm)
Tire Pressure
Rear (passenger): 32 PSI (2.25 kg / cm)
cable free play front brake 4 ~ 5 mm
Brakes
free pedal rear brake 2 ~ 3 mm
Cable Clutch
Free Play 2 ~ 3 mm
/Accelerator
Play : 20 ~ 30 mm
Markings on chain tensioner must be the same on both sides
Drive chain
should not touch the chain cover
Check
Distributorc
ode
City
PDI DT
PDI by
If OK
is not OK X
Manual de Servicio Bajaj Dominar 400
23