Maintenance - CEN-TECH 57209 Owner's Manual & Safety Instructions

Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVEnT SERIOUS InJURY: Unplug the Jump Starter, turn the Power Button off and allow Jump Starter
to cool completely before performing any inspection, maintenance, or cleaning procedures.
1. BEFORE EACH USE, inspect the general
condition of the Jump Starter. Check for:
• loose hardware,
• cracked or broken parts,
• damaged electrical wiring or cable insulation, and
• any other condition that may
affect its safe operation.
2. Keep unit clean and clamps free
of dirt, debris, or grease.
Item 57209 For technical questions, please call 1-888-866-5797
3. For longer working life, protect Jump
Starter from sunlight and moisture.
4. AFTER USE, wipe external surfaces of
the Jump Starter with clean cloth.
5. COnTAInS nOn-SPILLABLE, SEALED
LEAD-ACID BATTERY. BATTERY MUST BE
RECYCLED OR DISPOSED OF PROPERLY.
6. The battery should only be replaced
by a qualified technician.
Page 9