Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
CHARGE COMPLETELY
IMMEDIATELY AFTER
PURCHASE.
Fully recharge after
each jump-start.
Fully recharge monthly to
ensure long battery life.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20g
Advertisement
Summary of Contents for CEN-TECH 57209
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Wear ANSI-approved splash-resistant safety goggles. Alternating Current Read the manual before Amperes setup and/or use. Cold Cranking Amps WARNING marking concerning Risk of Fire. Reserve Capacity Follow connection procedure. Ampere-hours Page 2 For technical questions, please call 1-888-866-5797 Item 57209... -
Page 3: Safety
3. nEVER smoke or allow a spark or flame pacemaker interference or pacemaker failure. in vicinity of battery or engine. Item 57209 For technical questions, please call 1-888-866-5797 Page 3... - Page 4 BATTERY CLAMPS TOGETHER. but must be supplied by the operator. h. Unplug the Jump Starter from its Adapter before connecting its cables to a battery. SAVE THESE InSTRUCTIOnS. Page 4 For technical questions, please call 1-888-866-5797 Item 57209...
-
Page 5: Specifications
Specifications Input 120 VAC, 60Hz, 0.3A 15VDC, 0.5A Output USB 5VDC, 2.4A Cold Cranking Amps 210A Battery 12V, 9Ah, Sealed Lead-Acid Battery Cables 25 1/2″ L, 6AWG Item 57209 For technical questions, please call 1-888-866-5797 Page 5... -
Page 6: Setup
Work Light Button Warning LED Power Button 120 VAC Charging USB Port Input On/Off Clamp Battery Status Safety Switch Indicator Lights Work Light negative Battery Positive Battery Cable Cable Figure A Page 6 For technical questions, please call 1-888-866-5797 Item 57209... - Page 7 DO nOT EXCEED MAXIMUM CHARGInG TIME. functions while the unit is charging. 2. Connect the included Power Cord’s plug to a grounded 120 VAC 60Hz outlet. 120 VAC 60Hz Outlet Power Cord Item 57209 For technical questions, please call 1-888-866-5797 Page 7...
-
Page 8: Operation
Starter is fully charged. Recharge as needed, following the instructions in the “Charging the 4. If finished using the Jump Starter, Jump Starter” section on page page 7. press the Power Button OFF. Page 8 For technical questions, please call 1-888-866-5797 Item 57209... -
Page 9: Maintenance
RECYCLED OR DISPOSED OF PROPERLY. 2. Keep unit clean and clamps free 6. The battery should only be replaced of dirt, debris, or grease. by a qualified technician. Item 57209 For technical questions, please call 1-888-866-5797 Page 9... -
Page 10: Parts List And Diagram
Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Internal parts are not user-serviceable and are not available. Specify UPC 792363572095 when ordering parts. Page 10 For technical questions, please call 1-888-866-5797 Item 57209... - Page 11 Assembly Diagram Item 57209 For technical questions, please call 1-888-866-5797 Page 11...
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.