Control Keys; Setting Up; Power Connection; Battery Power - Abbott SoToxa TOX400P User Manual

2 . G E T T I N G S TA R T E D
2.3

Control keys

The SoToxa™ Mobile Analyzer has a five-way navigation button and the left and right soft keys. Please see section 2.1 SoToxa™ Mobile Analyzer
at a glance, which shows the location of these buttons.
The left and right selection keys can be used to select the corresponding on-screen buttons which will appear at the bottom left and right hand
corners of the screen when input is required from the user. For example, if the screen below appears, pressing the left selection key would take
the user to the menu while pressing the right selection key would take the user to the help function associated with this step.
The five way navigation key can be used to scroll up, down, left and right by pressing the top, bottom, left or right edge of the button
respectively. For example, if the screen below appears, the five way navigation key can be used to move the highlighter bar up and down
through the list of test results. Pressing the center of the five way navigation key selects the option that is highlighted on the screen and can be
used instead of the left and right selection keys for 'OK' and 'Enter'.
2.4

Setting up

The SoToxa™ Mobile Analyzer does not require any installation steps. The analyzer can be connected to mains power, to the printer and to a
PC using the cables provided in the system Carry Case. Use only the connections and printer provided. Alternative connections and printers
should not be used as these may be unsafe or incompatible with the analyzer.
If using the Software Application Suite, this will need to be installed onto a PC. Please refer to the Software Application Suite User Guide
which can be found on the Software Application Suite CD-ROM.
2.5

Power connection

The SoToxa™ Mobile Analyzer can be powered from a power outlet or by its internal batteries. To connect the analyzer to the power outlet:
Step 1: Insert the AC power cable into the power supply unit.
Step 2: Connect the power supply unit to the power supply connector, located at the top of the analyzer.
Step 3: Connect to the corresponding AC power socket.
Step 4: Turn on the analyzer by pressing the power button.
Step 5: If a power outlet is connected when the analyzer is running from batteries, the analyzer will switch to the outlet as a power source. When the
analyzer is connected to a power outlet the power connected symbol will be displayed in the status line:
Do not use cables or power supply units that are damaged as there may be risk of electric shock.
If the analyzer battery requires charging, the battery charging symbol will be displayed when the analyzer is connected to the
power outlet.
2.6

Battery power

The SoToxa™ Mobile Analyzer will automatically operate from battery when turned on if not connected to a power outlet. If outlet power is
lost or interrupted, the analyzer will switch to battery power automatically. To switch to battery power when in use, simply disconnect the
analyzer from the power outlet.
When running the analyzer on battery power, the battery charge level is displayed by the battery status symbol within the status line as
shown below:
10 | EN S O T O X A™ M O B I L E A N A LY Z E R | U S E R G U I D E