Ferroli OMNIA M 3.2 Operation Manual page 41

PRESET TEMPERATURE
PRESET WEATHER
TEMP. TEMP.SET
NO. TIME
1 00:00
2 00:00
3 00:00
PRESET TEMPERATURE
PRESET WEATHER
TEMP. TEMP.SET
NO. TIME
4 00:00
5 00:00
6 00:00
When double zone is activated,The PERSET TEMP.
function only works for zone 1.
、
use '' ''、 to scroll and use
PRESET TEMPERATURE
PRESET WEATHER
TEMP. TEMP.SET
NO. TIME
1 00:00
00:00
2
3 00:00
OK SELECT
You press ''OK'', and the becomes ''
is selected.
You press ''OK'' again, and the ''
timer 1 is unselected.
PRESET TEMPERATURE
PRESET WEATHER
TEMP. TEMP.SET
NO. TIME
1 08:00
2 12:00
3 15:00
OK CANCEL
to adjust the time and the temperature.Six periods and
six temperatures can be set.
1/2
ECO
MODE
TEMP.
25°C
25°C
25°C
2/2
ECO
MODE
TEMP.
25°C
25°C
25°C
、
1/2
ECO
MODE
TEMP.
25°C
25°C
25°C
''. The timer 1
'' becomes The
1/2
ECO
MODE
TEMP.
35°C
25°C
35°C
For example: Now time is 8:00 and temperature is
30°C. We set the PRESET TEMP as following table.
The following page will appear:
NO. TIME
1 8:00
2 12:00
3
15:00
4
1 8 0 : 0
5 2 0 0 : 0
6 2 3 0 : 0
TEMP.
35°C
25°C
8 0 : 1 0 : 2 0 0 5 1 0 : 1 0
INFORMATION
i
When the space operation mode is changed,
the PRESET TEMP. is off automatically.
The PRESET TEMP. function can be used in
the heat mode or cool mode. But if the
operation mode is changed, the PRESET
TEMP. function needs to be reset again.
The running preset temperature is valid when
the unit is OFF. It will run according to the next
preset temperature when the unit turn on again.
6.2.2 WEATHER TEMP. SET
WEATHER TEMP. SET=WEATHER TEMPERATURE
SET
WEATHER TEMP.SET function is used to preset the
desired water flow temperature depending on the
outside air temperature.During the warmer weather the
heating is reduced.To save energy, the weather temp.set
can decrease the desired water flow temperature when
the outdoor air temperature increased in heating mode.
Go to ''MENU'' > ''PRESET TEMPERATURE'' >
''WEATHER TEMP. SET''. Press''OK''.
The following page will appear:
TEMPER
35
25
35
25
35
25
: 8 0 0 2 : 0 0 0 2 : 3 0 0