Table of Contents
Advertisement
5
Transport and storage
Special conditions of transport are not required.
Transport
conditions
Storage
Storage in a dry and clean environment, protected from UV-exposures,
conditions
weather and ozone. Storage temperature: -20 °C to 60 °C.
Close all openings before storage.
6
Installation
Observe the safety instructions in chap. Safety, from page 3 on.
Standard
installation
The vibrators can be operated with 3/2- or 2/2-way valves. The filter regulator can be used to
set the operating pressure desired and thereby the frequency.
1.
Mount the vibrators with two fastening screws and self-locking washers on a clean and
flat surface (flatness of ±0.1 mm).
a reinforcement profile (U-profile or suitable console). Weld the reinforcement profile to
the mounting surface provided by the customer so that the vibration energy is optimally
distributed.
Lubricate the screws with a suitable assembly paste.
Observe the recommended values for screw sizes and tightening torques.
Mounting on U-profile
2.
Mount the maintenance unit (filter, regulator), valve and supply line. Observe the mini-
mum cross-sections for valves and hoses.
Netter
Vibration recommends placing the vibrators on
Mounting on weld-on console
1
Filter regulator
2
2/2-way valve
6
Hide quick links:
Advertisement
Table of Contents
